captain_aggravated

Greetings buildapc!

I built my current rig during the parts drought during the pandemic or whatever, I scraped together whatever I could find and then stopped keeping up with PC parts for a few years. Looking to build a new rig, PCPartPicker attached, just looking for some double checking for any details I missed.

Use case: Linux and Linux only. It's gonna run some FreeCAD and some LibreOffice and a lot of Firefox and a lot of Satisfactory. I'm trying to build it in time for Satisfactory's launch on September 10, I've heard tell of a Ryzen 7600X3D coming imminently that I don't want to wait for.

I have a Gigabyte M34WQ monitor (1440p ultrawide 144Hz FreeSync) that I'd like to take full advantage of in Unreal engine games like Satisfactory, the upcoming Subnautica 3 and such.

My budget is $1500, I can exceed that but for every $100 over I'm going to read you a vogon poem.

This is to be my first desktop AMD GPU. My current rig (Ryzen 3600/GTX-1080) is Nvidia, it was all I could get my hands on, and the 1080 predates a lot of the whiz bang acronyms like DLSS RTX OMG LOL, I have no idea how well any of that from AMD or Nvidia works in Linux, I don't particularly care about raytracing. Word on the street is AMD is less of a pain in the head to deal with on Linux and Wayland stands a chance of running, so...

thoughts/suggestions/donations?

Update: Sub in a 7700X CPU and a 7900GRE GPU and...IT'S ALIVE:

Everything but the case arrived so I decided to go ahead and test bench it.

Submitted for the approval of the Midnight Society, I present to you The Tale Of The Cedar Planter Box.

Solid cedar, mortise and tenon joinery, with a nice bead detail on the slats. Garden hose sold separately, pine straw not included.

For tweens!

I use BackInTime (which is basically a front end for rsync) for backups, and I run one every night at 1 AM. This is on Linux Mint Cinnamon. If the computer is locked/the monitors have gone to sleep (computer isn't suspended), when the backup begins the monitors turn on, and will then stay on all night. I don't want to waste the power or wear out my backlights.

How can I stop it from turning the monitors on, or how can I get it to turn them back off?

I posted this one to [email protected] too, as I do most of my furniture projects, but I'm particularly proud of how this one came out. Solid white oak with genuine mortise-and-tenon joinery.

I'm working on replacing my porch furniture, and the side table was the worst of the lot so it got replaced first.

I've built a few little tables by now and I've got a lot of the process down. I used this one as an excuse to practice making actual mortise and tenon joints instead of the loose tenons I've used in the past. The mortises that the center brace sits in were chiseled by hand, the others are routed.

I'm thinking of making a couple outdoor-friendly morris chairs to replace those old iron ones. That'll be a minute though.

I think I saw this in a youtube video taken out of context so I'm not exactly sure when it was made, or if it was a TV show or a movie. And while it could obviously be from any time after 1980 because it references Empire Strikes Back it felt 21st century to me.

It seems to be a future post-apocalyptic setting, the power isn't on, everyone's dressed in rags, there's scavenging etc. and in a moment of down time two of the main characters act out the lightsaber duel from Empire Strikes Back to entertain the young children who live there, and the kids gasp at the "I am your father" bit.

What's this from?

It's actually just friction fit together in this picture; as I type it's in the clamps as the glue dries. Tomorrow some final touch up sanding and the first of four coats of spar varnish, then a few decades on my front porch under a couple potted plants.

There's an education in all this oak; it looks conceptually simple compared to the shaker tables I've done so far, right? IT AIN'T! Each leg cambers out by 5 degrees in both directions, and that tiny difference make this project SO much more obnoxious than a table with vertical legs. Laying things out accounting for that compound miter at the top and bottom is "fun." The upper and lower frame rails are no longer the same length, they're different but related lengths. That lower panel? Can't be installed with the frame assembled. Hell I didn't even bother attaching it in any way, it's just captive in there.

Unlike the previous tables I've built that are held together with floating tenons, the rails are thin and fit entirely into mortises in the legs, which meant some chisel work squaring the corners of the mortises, so I gained quite a bit of experience with chisels here.

But, another project nearing completion.

A simple shaker style table in white oak, finished with spar urethane and kitty approved.

The breadboard ends on the panels were an education on this one; on the top they aren't strictly necessary, but I felt they were needed on the lower panel so that the movement of that captive panel wouldn't rack the legs. Found out I prefer making the tongues with a router rather than the dado set on the table saw.