Uhh, because of the heat of the raspberry pi & camera behind there
well. at least my viewers will know it had a flared base.
Ah yes, 10W of heat :3
Suppose you were in this situation and suspected something. I’d imagine the space behind it would be totally dark, so what would be a safe way to check if there’s a gap in between without breaking the glass?
there are no "one-way" mirrors. You just need to make your side darker than the other side (there's a reason the observation side of a two-way mirror is never brightly lit, but the interrogation room is)
Tldr: put your face right up against it and use your hands to block out as much light as you can
I read a long time ago that putting something flat against the mirror will show you. I think if the mirror is legit you’ll see the reflection directly on the surface, if it’s two way the reflection will look like it’s inside the glass.
But I’ve never had the chance to actually test that, so take it with a grain of salt.
Edit: Turns out this is incorrect; thanks to everyone for educating me!
You want there to appear a "space" between your fingertip and the mirror, if touching it directly. If there's no space, then say cheese.
It would be the other way around, if at all.
"First-surface" mirrors where the reflective layer is on the front of the glass are quite fragile, so wouldn't typically used for residential applications (you'd remove the reflective coating by cleaning it).
A regular mirror has the reflective surface on the back of the glass (which is then is further coated with a protective paint), leading to the effect you describe.
I don't however know enough to say one way or the other whether a surveillance mirror would becessarily be a first-surface mirror.
This is ancient advice for two-way mirrors, IIRC nowadays even legit mirrors can reflect directly from the front instead of the back. In this age of spy cameras this is mostly irrelevant.
Another tip was shining a bright light to illuminate the supposedly dark room on the other side, which again, would be way more expensive than a smoke detector spy camera.
Guessing this is a hotel bathroom by the looks of it.
Then it very likely has a mirror with integrated heating. I have one myself and love it.
It’s heated.
There's a ghost in your house that's trying to tell you "rectangle", but it's illiterate.
Try to figure out what "rectangle" means.
Nah, just means that the mirror can't render the Unicode character that the ghost has sent.
It was the poop emoji
or the eggplant emoji. its placed after a shower.
Don't believe any of the other comments, this is clearly a one-way mirror with a camera inside. That conspiracy theory you've been thinking about a lot lately is true, and even worse they know you are on to them. Remember that creak in the floorboards you dismissed as the house settling? Footsteps. The way your coffee mug was turned slightly counterclockwise this morning? Intentional. They watch you when you sleep, and know how much time you spend looking at your phone.
Or it's what the top comment said. Sleep tight!
Or it's what the top comment said. Sleep tight!
Writing this in the top comment doesn't help, like, at all...
There are coatings /sprays for this
I think in this particular case it might be an integrated heating element like this: https://clearmirror.com/products/shower-clearmirror
They're popular in shower rooms in Japan.
You're popular in shower rooms in Japan.
A gee, thanks.
This comments section feels like schizophrenia.
These are such a good idea. It works by having a heater behind the mirror which prevents the condensation.
These are such a good idea. It works by having a heater behind the mirror which prevents the condensation.
For anyone who wants to achieve the same effect take a dry bar of soap and rub some into an area of a mirror in whatever shape you like (circle, square etc). Then buff it out with a dry soft towel or cloth until you can no longer see the soap. Next time you take a shower that part of the mirror won't be fogged up. Reapply soap and buff out every couple weeks or so if you want it to stay that way.
I'm going to draw penises the next time at a friend's house
I had this happen in a hotel, and being curious I removed the mirror, and yes there was a hole in the wall behind it, no there wasn't a camera there. It was just were they had ran the wiring for the lights on the mirror.
It would make sense that it serves like an access hatch to a terminal block that feeds the whole room. It's simple, costs nothing, is easy to get to (compared to having it sealed in the wall), protected from splashing and prying guests, and close to where you want most lights and outlets.
being curious I removed the mirror
protected from [...] prying guests,
Nothing is protected from those willing to pry hard enough ;)
These are such a good idea. It works by having a mirror behind the heater which prevents the reflection.
Alright, but now the heater is in the way.
Yeah, that's why it prevents the reflection
These are such a good idea. It works by having a heater behind the mirror which prevents the condensation.
Ps. Excuse the multiple posts. fedia.io was having a moment. I’ve deleted them now
Apparently no one here has been to a Home Depot or Lowe's in the last 15 years.
Maybe somebody's stashing delicious freshly baked goods back there?
It's a two-way mirror and there's a camera on the other side recording you 24/7.
Isn’t a two-way mirror just a window? I think you meant “one way mirror.”
No. English is just hella stupid. 🤣
A one-way mirror, also called two-way mirror...
How many ways is a normal mirror, then? Do we call it a "no way mirror"?
Just posting to say I was here when everyone replied with "These are such a good idea. It works by having a heater behind the mirror which prevents the condensation."
This is for strictly mildly interesting material. If it's too interesting, it doesn't belong. If it's not interesting, it doesn't belong.
This is obviously an objective criteria, so the mods are always right. Or maybe mildly right? Ahh.. what do we know?
Just post some stuff and don't spam.
