Title text:
It's not as big a loss as it looks, because now I have have leftover supplies, which will help me talk myself into doing this all over again with a new project!
Transcript:
Transcript will show once it’s been added to explainxkcd.com
Source: https://xkcd.com/3233/
I'm in this picture and I don't like it.
I didn't want to spend $10 to buy a 3d model my nephew wanted me to 3d print, I've spent 2 weekends so far modelling my own version.
There are also a bunch of sites that turn an image into 3d print files if that helps
Oof ouch owwie my entire existence.
My partner has gotten into car detailing and Luke's to clean our hats and shoes. He's happy with his hobbies.
My entire existence is fighting entropy to help save people money when everything breaks, and my hobbies are camping, repairing old Coleman Lanterns and riding/maintaining a 41 year old motorcycle.
Take a guess who feels fulfilled and accomplished with his hobbies more often?
I enjoy my hobbies, honestly, but there's basically never a "done" state for this stuff, just "I can't afford the cost/time to do this lower priority thing right now, I'll revisit it when it starts making strange noises on the highway/actively combining fuel and fire".
Things really can be harder than they look! Especially when you don't have a optimized build process and bulk buying power.
But maybe you got some value out of the time and money you "wasted". Learned something, appreciate things more, and maybe the next project will go a bit better.
My hardest (self-imposed) projects that I've worked on, have always led to my easier projects becoming even easier. I like to build upon the things I learn, it's half the fun
The question isn't usually about saving money, it's about whether it's worth it to me to save personal time (vs learning something new). I like it
Bought a used car recently. Rear door latch was seized inside the door. surely that'll be an easy fix, I thought when I gave the seller my offer. after all, it's over a decade old and an economy car, those cars aren't too complicated yet.
one $12 handle to replace the one I cut off the door (and also the second half of it was broken anyways, so that was always going to be an expense), one pair of $30 long nose vise grips that didn't even help me get a seized half of a screw out of the inner latch assembly (screw sheared immediately when I tried to remove it to take the assembly off the door), two broken drill bits trying to drill out that seized screw that the vise grips didn't help with, $1.83 at the fastener store to replace the captured nut that the seized screw was stuck in after I just smashed it out with a hammer, 2c of dollar store epoxy to secure the replacement nut that was just slightly smaller but enough that it wasn't held properly in the part, a die to chase the threads on the incredibly rusted screw holding the window actuator to the window (I actually already had that, but still, had to buy the set for a previous project like this), a lot of penetrant and scouring for the original problem part that was causing the door latch to seize, $180 for an ultrasonic cleaner to help clean that seized spring and the shaft joint (okay again I bought this for other reasons too in the past), 2c of lube I've had sitting around for ages, and then a few broken trim retaining clips and a slightly broken inner door panel and the door is good as new! y'know, but without paint matched door handles.
the replacement platch assembly part was quoted as $100 from the dealership, so I'll take the $2 + cost of driving 15km that it was to fix the one I have. I wish it hadn't taken me 8 hours to complete, though, once you account for all the figuring out how to open the door when neither inside nor outside handle worked, and take it apart, and get the broken part out, and clean the tape off the door paint that was stuck to it after I put it on to prevent rain entering the door from the open holes where the handle used to be, and then put it all back together. at least putting it back together was as easy as expected and took less than an hour going slow. all the other expenses, to be fair, were either inevitable or something I'd already bought for various reasons or will be able to use elsewhere (after all, he who dies with the most tools, wins)
the odds that my repair fails where getting a shop to do it, however, are not zero. also, the shop would likely have replaced the broken trim clips. I didn't, because I don't have them. so the door panel is also probably going to rattle a bit now.
Trim clips are cheap, check for all the broken ones you can find and replace them. Double sided tape and some packaging materials like foam helps with rattles if stuff just doesn't fit perfectly, if stuff is already off it doesn't take much extra time to stick a few pads.
(If the manufacturer charges too much for clips, you can probably find them on AliExpress using the part numbers, they're often a bit annoying to substitute so if you're only saving a few dollars by trying your luck with a mix of generic ones, I'd say don't bother. If you don't have any, plastic levers for trim are also very useful and cost very little, the metal ones tend to scuff things and covering the ends in tape makes them too bulky)
1: Angle grinder the previous latch until it opens.
2: Screw on a simple gate latch from the hardware store ($5)
3: If you want to be really fancy, add a decent padlock to that latch ($10)
Done.
If you took it to a shop the apprentice will be doing the work and breaking more shit than they fixed. If you don't pick it up soon enough and can't prove it was them then your paying to fix their fuckups as well.
I feel personally attacked
No no, you should feel valued! You played, you learned, you moved on.
Absolutely.
FAFO isn't always a negative thing.
Fuck about, figure out.
Oh good it's not just me
I hate this because I'm halfway through it. At least now I have instructions for the other half.
Yes, but then you can fix it and keep it going for your life! That's at least $80 or $160 saved direct, plus life lesson and future fixes... (Fuck MC) priceless!
to be fair, we usually learn from our mistakes and do it well the second time.
we get the 80$ part the third time.
I feel personally attacked
Jesse talking to Walter about a big box of meth.
A community for a webcomic of romance, sarcasm, math, and language.