lemann

Ordered back in Feb and just got delivered!

As soon as I saw the PS1 version release a while back, I was eager to get a PS2 version to backup the single 8MB card I've owned since my first PS2. I got all my games pre-owned back then, so sadly none came with extra memory cards 😭

Initially I ran into some issues copying the save files from my old 8MB to this one (using wLE), ended up turning off the "Game ID" MCP setting so all saves get copied to the same VMC instead of dedicated ones for each game.

Apparently this card works on the PS3 too if you hold the front right button while connecting the USB, looking forward to that since I have some PS1 saves trapped in there...

I've been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)

However I recently came across a video by CNC kitchen where he raised some potential health concerns relating to the fibers specifically inside the filament. One of the commenters mentioned they couldn't wash the fibers off their skin, and another likened it to the "3d printing equivalent of asbestos"

I don't plan to print with it just yet due to needing a hardened nozzle, and spare extruder parts. However when I do, i'm feeling a little worried about how safe it is - mainly whether the final printed part is fine for occasional skin contact, or whether this material should ideally be left to just cosmetic parts.

P.S. image not mine, taken from here

Title pretty much, my brand new deck arrived today and I wasted no time loading up all my games and linux desktop apps onto it. I was pretty much firmly sold on it after having the opportunity to experience one 😁

Out of excitement I also impulse ordered a full replacement shell in advance, thinking I was prepared to also tackle the screen. Turns out I was wrong - the screen is so well stuck down that I couldn't get it to budge with a 2kw hot air gun. The battery was also getting quite warm from the heat.

Pretty much ended up putting everything back to the original casing before I damaged something, and settled for just changing the back cover instead 😢

Maybe I'll give the replacement shell another shot in future, but not too sure to be honest.

Anyone managed to do a full shell swap? How did you find it?

I was recently tasked with rewriting the base CSS for an inventory/project management system, creating a set of reusable components designed to match, using an open/close approach. These were based on a pretty strict specification provided by one of our designers, who unfortunately left.

The implementation went well, but I've run into a bit of a problem. Quite often the team members make changes directly to the base class in the new base CSS file, rather than extending it, creating a new one, or using each system area's dedicated stylesheet file.

One of the more recent changes involved removing a grid-gap property from a rule from the base CSS, affecting a lot more than the single UI element the team member was working on.

Should I approach the team about this?

I haven't mentioned anything yet, but have noticed our QA team putting in more bugs about UI elements looking odd

TL has been returning 1004 errors all day, however their staff are aware of this looking at a discussion thread on a certain site.

Hopefully it gets fixed soon - posted here just in case others are having issues with the site and its mirrors

I'll admit I'm a little lost/down, it came out of nowhere! Over the years he's produced an endless stream of genuinely interesting videos. I can't really think of any other video hosts that can make a wide range of topics sound so interesting.

Probably I'm just scared of change...

On the flip side though, I'm really happy that he's decided his personal happiness is more important, and has decided to focus on people close to him.

What are your thoughts?

This is a pretty neat tour of Prusa's printer factory on the Strange Parts channel

They have an absolutely massive 600 printer farm, with the same mk3 and mk4 machines that they sell to customers, which is really impressive.

They do almost everything in-house, including manufacturing the printer mainboards, for faster project planning and turnaround times.

Note - the video is pretty long at about 40 mins!

After watching I'm a little tempted to pick up some prusament filament to support the company, really like how they are supporting local talent.

I've wanted one of these for a while, decided to bite the bullet a couple days ago! Seeing as I was somewhat familiar with CAD software (from engineering classes several years ago) it seemed fairly straightforward.

As someone completely new to this, there have been a TON of things I've learned from binging 3d printing channels...

• First layer adhesion 😭
• Bed levelling
• Types of extruders (bowden/direct) and how they affect what materials you can print
• Tons of printing materials, personally will be using PETG and PLA
• Keeping filament dry in a vacuum bag

And soo much more - but there is still a lot that I have absolutely no idea about.

The printer is a second-hand Flsun Q5, the seller sent it fully assembled (very, very brave of them, but it arrived unharmed). I had a brief look around at other options, but for the price of an easythreed, this was a no brainer.

I think the seller had some issues with bed adhesion, as there was a ton of slimy stuff on the print bed when it arrived. Used some isopropyl alcohol and a dish sponge to scrub it off, seems all fine now!

I had some issues with the Z-offset but got it good enough to where there is some first layer adhesion.

Model finished printing while I was drafting this post, I sprayed some contact cleaner onto the glass bed to take it off (is that bad?). There's some stringing:

I bought a 3d printer off Ebay which got delivered not too long ago, and it came with 2 sd cards - one with a build video and some demo print files, but worryingly another card that has all the previous owner's personal files on there.

Not sure whether to format it, or to contact the seller offering to send the card back (free of charge)... how would you prefer to be approached in a similar situation?

Edit: No gcode files are on the card, just 30gb of pictures, music and videos. Sent the seller a message offering to upload it to cloud or to send the card back

I recently came to the realization that I've been kinda punishing myself with cheap no-name solder that is really difficult to work with.

I reluctantly bought this (rather expensive) lead free solder for around $25 and the difference really took me by surprise - it melts and flows so easily!

Kinda got me wondering what everyone else has been using for solder, or what's worked well for you so far at least?

Imagine a world where billionaires having petty arguments result in functionality being remotely removed from your $40,000 device...

TL;DW: Disney decided to cease advertising on X (formerly Twitter) and not long after, the Disney+ app was removed from many owners' Tesla vehicles. Users who have already used the app shouldn't be affected by this, however those who haven't will no longer have access to this functionality.

This video follows on the heels of GM announcing removal of CarPlay and Android Auto from their future vehicles, indirectly reducing the freedom granted to vehicle owners of what they can run on their infotainment system. Running apps that provide traffic warnings and additional functionality will be no more, likely paving the way for more unnecessary subscription addons - and even situations like this where functionality can just be taken away without warning