[-] [email protected] 43 points 1 month ago

How the hell do subs unionise? 'Hell yes, we'll do whatever you want!'

'We demand worse treatment!'

(sorry subs, just poking some fun 😋 )

[-] [email protected] 40 points 7 months ago

Perhaps they used to know it but FROGOT

[-] [email protected] 41 points 8 months ago

A friend of mine crashed her motorbike a few years ago and her face bounced off the road. Her chin bar flexed inwards so much that it broke her nose and chipped a front tooth.

She was furious that the helmet didn't protect her properly, until her husband who was riding behind her pointed out that she essentially landed face first at over 60mph, and that without the helmet, her face would have taken the full force of the landing.

[-] [email protected] 43 points 10 months ago

Have you tried the online version of MS Office? I'm not sure, but I think there's a free version. Depending on the file, you might be able to convert it to another format, then use a FOSS tool going forwards.

[-] [email protected] 36 points 10 months ago

I'm reading this thread on mobile, and the fediverse logo next to the community name is much easier to see than the three stars. If I didn't already know what the three stars were from the rest of the post, I wouldn't have a clue what they were supposed to be in the body. They look like a blurry capital A.

Obviously the fediverse logo is bigger there, which helps, but it's not significantly bigger, and would still be clearer at a smaller size

[-] [email protected] 39 points 1 year ago

I can believe that.

I hadn't bought a bike for years, and a few years ago managed to pick up a cheap second hand bike for £60. It wasn't a bad bike, but obviously nothing special. After the lockdowns, when every man and his dog seemed to take up cycling, I looked at getting a cheap new bike. The cheapest ones I could find were a few hundred pounds.

I looked at ebikes earlier this year, and the magazines and websites reviewing the cheap bikes were setting a minimum price of £1500 to avoid the cheaply made junk. Even second hand bikes were going for £800+

To put this in perspective, I can get a second hand motorbike for the same price range, and a car for around £1000. Obviously these are not going to be the best motorbikes or cars on the road, but they run, and will last for at least a few years.

[-] [email protected] 33 points 1 year ago

I powered through that, and I'm watching the next arc. You'll be relieved to know that they've found a safe place. A few of the main cast have noticed some flaws, but I'm sure it'll turn out ok...

[-] [email protected] 38 points 1 year ago

I totally agree with you about the swords. Not so much about the sick in the street though...

[-] [email protected] 36 points 2 years ago

Oh no no no no no...

[-] [email protected] 40 points 2 years ago

And you can't remember any names.

40
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

A few years ago I became seriously ill. I was in a coma on heavy duty meds, and had a kidney transplant. I'm much better than I was, but I can't do a lot of things like I could before.

We've now got quite a few kids in the extended family, so a while ago I wrote a short story to try to make it easier for them to understand. My wife and family like the story and have suggested making it into a picture story book. Problem is, I can't draw and my imagination isn't very good.

How can I get pictures for the story if I can't do it myself and don't have the money to hire someone? I want to avoid using AI tools because of the potential copyright issues.

I haven't tried the services like Fiverr because I've heard that they force a race to the bottom on prices, but does anyone have any experience, or have any ideas of what I can do please?

Thanks in advance :)

25
submitted 2 years ago by [email protected] to c/[email protected]

A few years ago I bought an old Mac, PowerPC I think, but it doesn't work properly. If I boot normally only one of the two CPU cores works, but both work in safe mode.

I imagine that there are ways to repair it, but as it's second hand, I would probably be better off with a clean installation. I've never owned a Mac before, so although it's outdated, I'd rather get it back to a default state than install Linux, and it also means that once I've finished with it I can pass it on to someone else who would appreciate it.

Is there a way to get the installation media? From what I remember from the last time I tried to get it running, it can use either Snow Leopard or Mountain Lion (10. something?)

Thanks in advance :)

5
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

If I scroll past something in All and want to go back to it, I'm finding that sometimes I can't. The feed acts as if I grabbed the top of the screen and refreshes.

Just to be annoying, it doesn't always do this. Most of the time it works as expected, and lets me scroll.

It doesn't happen inside posts or communities, only the All feed. I've just checked Home and Local too, and don't get the issue.

EDIT: This is on the Android app

EDIT: I just went to the Github issue to add my report and noticed that my app updated yesterday after I was having the issue, and I haven't had it again yet. I'll hold off reporting unless it happens again with the current version of the app.

20
submitted 2 years ago by [email protected] to c/[email protected]

Hi all :)

I'm looking for a Kindle app replacement for my phone and Kindle Fire, ideally one that can get my Amazon books if possible.

I want to be able to add books through Calibre, and sync them to the furthest page read on all devices, and I want to be able to store all my books without the app removing them.

Does anyone know of an app that does this please?

57
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

Are there any good tools for listing your current programs, maybe exporting settings etc. Listing hidden settings and save locations would be great too.

I'm about 90% ready to switch to Linux full time, and I want to make sure that I've got everything. I've got a horrible feeling that I'm missing something, but I can't think what it might be.

EDIT: Ironically, I forgot to mention my ADHD / memory issues. I could do with a tool like this because I forget about anything that I'm not currently using, or actively thinking about using soon >.<

46
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

Hi all :)

Apologies, I know this isn't a woodworking question, but I don't know of a better place to ask about restoring a desk like this.

It's an oak desk, but it looks like there used to be a felt inlay, or maybe vinyl. The top of the desk has an inlay of plywood, with a small raised edge to the oak, of maybe 2 - 3mm. Staining or varnishing doesn't seem to be an option, as the style of the plywood doesn't match the rest of the desk, so I'm looking for ideas for the top.

Felt or vinyl would be the obvious options, but I'm hoping to hear some other ideas. It's going to be used as an office desk, with two computer monitors and a keyboard and mouse, but also for writing, mostly notes rather than anything serious.

The underside of the plywood has oak planks running from front to back, so there's the option of removing the plywood and putting in another piece of wood, but I don't want to spend too much if I can help it.

Does anyone have any suggestions or feedback please?

Thanks in advance :)

EDIT: Sorry if I'm a bit slow to reply tonight, I'm having a mad dash to tidy up and make room for the new desk. I've managed to plan everything backwards (again...)

Note for myself - the lip is 1mm and the plywood is 3mm, as best as I can tell without dismantling anything

23
submitted 2 years ago by [email protected] to c/[email protected]

Or another container type if there's a better one?

My server was originally connected to my TV to run Kodi and play some games while serving files, so it's running Xubuntu. While it works well for the most part, I want to set it up properly, and be able to move the services to a new system when the time comes.

I was thinking that Docker, or another container system, would probably be best, because as well as hopefully being able to be moved, installing new software shouldn't affect anything else.

Am I on the right track? Can containers be moved to another system without needing to be set up again?

I'm running the *arr suite two Java Minecraft servers Plex media server Two copies of qBittorent NZBGet Ombi Mylar Codex and probably some others that I've forgotten.

While I'm at it, is there a best OS to base everything on? Preferably free. The server is a 4th generation i5 with 32GB RAM, and currently about 10TB of HDD space, with a small SSD for boot, and a Quadro graphics card for transcoding.

Thanks in advance :)

45
submitted 2 years ago by [email protected] to c/[email protected]

I found the site and tried to check, but it wouldn't show me anything without being logged in, so I created an account. Now that I'm signed in though, I can only find vague rules, like

The User's account is for personal use only. Only the individual who holds the account is allowed to connect on it. Connections to the User's account are recorded so that we can detect account sharing. The User agrees to keep his login secret, We won't offer technical support for account hacking.

How does this work with a phone or laptop, for example? What if I sign in at my parents house when I visit for a few days?

Can anyone help please?

37
submitted 2 years ago by [email protected] to c/[email protected]

Hi all :)

I've been using MediaMonkey on Windows 10 and Android to organise my music, playlists, audiobooks, and podcasts, including syncing them to my phone. MediaMonkey has let me down again, so I'm looking to switch, and as I'm trying to switch to Linux too, now would be a good time to get a Linux media manager.

One of the main ways that I use MM is by either building a playlist and transferring the whole thing, or adding to a playlist and just syncing the new tracks. I prefer the tracks to be placed in their artist / album directory though, rather than a directory for the playlist.

I also use MM on Windows to organise my tracks with online metadata, usually from Discogs, so that it matches the entry for the album. I store my media under music\sorted\album artist\album name\track no - artist - title, with a similar setup for audiobooks and podcasts, and would prefer to do the same with the new software.

Does anyone know of anything that can do this please?

I've looked at Strawberry and Cinnamon, but development seems to have stopped, and I don't know enough about things like flaws and bugs to know if they're still safe to use.

Thanks in advance for your help :)

[-] [email protected] 34 points 2 years ago

They seem to have adult supervision, and it stopped an adult that they didn't recognise from accessing the space.

12
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]

I've got an Epson Stylus SX435W all in one. It's working with Image Scan! for Linux 2.30.4, but is not being detected by Epson Scan 2. I've checked everything I can find, it just looks like my scanner is too old for the software.

Simple Scan seems to be too simple, but I don't want to have to launch something like GIMP and manually tweak everything.

I ideally want something with a built in colour enhancement tool like the Epson Windows software, and something that will remember the directory and name of the scan e.g. if I set it to ~/Pictures/Scans/Scan001.jpg, the next scan will automatically be ~/Pictures/Scans/Scan002.jpg etc. Descreening and Backlight Correction are both tools that I use fairly regularly too, as I mostly scan old photos. There's a screenshot of the Windows Epson software on this page if it helps:

https://files.support.epson.com/htmldocs/wfp4520/wfp4520ug/source/scanners/source/scanning_software/tasks/starting_scan_icon.html

Does anyone know of anything that might be a good alternative please?

EDIT: I'm just trying out XSane now. XSane and Image Scan! both give a slight colour cast, purple on this particular photo, but XSane seems to have more control over the settings.

I'm currently avoiding VueScan due to the price. While it does look like it's great software, I can't currently justify paying £50 when I've already got working software under Windows.

[-] [email protected] 33 points 2 years ago

While it sounds good on paper, in practice, they've screwed it up. They're putting the new speed limits in place on every 30mph road in Wales before they've put the public transport alternatives in place.

There's currently no reason for someone to switch to public transport, especially if the buses are going to be stuck at the same speed as the cars, but stopping regularly too. Our roads are too narrow to install bus lanes, and barely have enough room for single file traffic through lots of the towns and villages. The trains are being upgraded, but that's not scheduled to finish until at least next year, and at the moment they're slow and very unreliable. It feels like every week the trains are cancelled and an inadequate replacement bus service is put on.

I'm disabled, and have to travel from my town, Aberdare, to the main hospital in Cardiff, UHW, on a regular basis. If I had to leave now, it would take 42 minutes by car, or 2 hours and 6 minutes by public transport. The shortest journey is tomorrow morning and would take 1 hour and 31 minutes, more than double the time of the car journey. The closest inpatient hospital is 22 minutes by car, or over an hour by public transport. The difference the new speed limits are going to make is negligible compared to how slow public transport is here.

All this is going to do is annoy and upset people, and turn them off the idea of using public transport, and push a lot of people towards voting for the parties who were against this. Out of the main parties, that mainly seems to be the Conservatives, so that's going to be bad for all of us.

33
submitted 2 years ago by [email protected] to c/[email protected]

I've just opened the OSM site on my PC to have a look at the history in my area, and I've seen this apparently massive edit. It covers most of the US, a lot of Canada, and a significant chunk of Europe and the UK.

wheelmap_visitor says that 'This is a proxy user for all wheelchair tag changes happening on Wheelmap by anonymous users of the website and app Wheelmap.org.' so does this mean that if someone has made edits to areas inside the rectangle at some point recently that they all get included in this edit?

19
submitted 2 years ago by [email protected] to c/[email protected]

Hi all :)

This is more of a curiosity question than anything else.

About two or three weeks ago, I added two buildings and the businesses inside them through the OSM website. I haven't had a chance to do anything else yet.

I installed Organic Maps earlier to try it out, but noticed that my buildings weren't there. I tried OSMAnd+ and Street Complete too, but they still weren't there. They are there in Every Door though.

Is this normal? Does it take a while for updates to filter through to apps, or have I done something wrong?

view more: ‹ prev next ›

Tippon

0 post score
0 comment score
joined 2 years ago