218
Want to clean/replace air filter? Remove engine. (thelemmy.club)
submitted 10 months ago by Darkassassin07@lemmy.ca to c/assholedesign@lemmy.world
31 comments fedilink hide all child comments

The cover for the airbox on this Honda generator hinges open to the left, but the frame rail is directly in front. The airbox is also bolted to the engine from inside (behind the filter).

I've throughly looked over this and there is no way to open that airbox unless you unbolt the engine from the frame, or perhaps modify the lid hinges with a saw so it doesn't have to swing as far to come off.

you are viewing a single comment's thread
view the rest of the comments
[-] Fiivemacs@lemmy.ca 10 points 10 months ago* (last edited 10 months ago)

pretty sure it's EP2200CX

multiple posts online of people bitching about the same problem, visually looks the same as well with the box being blocked by the framing.

https://www.manualslib.com/manual/677509/Honda-Ep2200cx.html?page=41#manual

page linked to the filter removal. 41

[-] Nougat@fedia.io 10 points 10 months ago

This one looks most promising.

For anyone who's having the same problem, undoing the two mounts underneath the frame at the air cleaner end will give you just enough play to push the engine away from the bar and open the cover just wide enough to push the hooks through the setting pins. You'll probably need two people.

So ... yeah.

Edit: If you don't have a second person, you can probably pull the engine back with a ratchet strap after unbolting the mentioned mounts.

this post was submitted on 16 Jul 2025
218 points (99.5% liked)

AssholeDesign

11313 readers
3 users here now

This is a community for designs specifically crafted to make the experience worse for the user. This can be due to greed, apathy, laziness or just downright scumbaggery.

founded 3 years ago
MODERATORS
Buddahriffic@lemmy.world