I'm using home assistant, with mqtt which acts for many things and I get notification in different way depending the needs. Could be home assistant app or telegram or lighting up some light or sending voice messages to a speaker. All notifications are triggered by automations looking at states. Haven't done it but automation could be re launched automatically until (for exemple) I press a button or responding to telegram message
No, there isn't aac video . Your post mixed up, You are confusing audio and video codec and don't give any details for people to help you out. Instead of ranting, ask for help with details (we are not on Reddit)
It is mostly targeting french content (RD is a french company), so most user may have not see a big change. For french, RD has become muche less attractive because RD has banned biggest french torrent site and 1fichier files are scanned, if file matches hash content from movies/series it will blocked download.
Not sure that's a leak but couple of pictures available. Will add them later
While turning down temperature might help as it will be less fluid, i tend to think that increasing retraction might give him other problems (unless is settings are really low). On pictures we only see stringing at the top where printing areas are very small which means much more retraction are needed. His issue could be related to maximum retraction count and/or minimum extrusion distance, when those numbers are reached, printer will not retract filament to protect grinding too much filament. Others parameters to look out are retraction speed and prime speed but since OP didn't share settings, no way to tell what he could try.
To OP, please share your printing settings.
You definitely needs to calibrate your estep and flow rate as others mentioned. If numbers were correct then you might have a partial clog. If so, clean it and check Luke's hotend fix on thingiverse/printable (really worth it). https://m.youtube.com/watch?v=7tCxO17XZtw
Under extrusion aside, you can get better text details by using a smaller nozzle as one issue for the text clarity is line width, while it isn't ideal you can also try to set 0.30/0.35 line width with 0.4 nozzle.
Also, if you do plug in usb from your computer to printer (to calibrate estep), make sure to cover the 5v pin on usb cable with electrical tape. Otherwise you might wreck your printer mainboard. https://community.octoprint.org/t/put-tape-on-the-5v-pin-why-and-how/13574
Relying on 4 nvme drive for low power isn't ideal as nvme drive needs about twice more power compare to sata SSD.
A complete and affordable setup that will merge anything you want inside a single app will be by using home assistant. But while it is much easier to setup and maintain than a few years ago, selling the house will require new owner to have a few tech knowledge. You also have to make sure that your setup is designed to be used by all family whatever there age and knowledge (and it isn't always simple)
Describing everything available that would make it a perfect place will take a very very long comment but here are some hint, look at ethernet cameras instead of wifi, ZigBee and zwave instead of wifi for most of the devices as those protocols are designed for smart homes unlike wifi, use as less as possible cloud base solution.
As a starter, you can check for temperatures/humidity sensors, contact sensors for doors/windows, automated curtains, switches, presence detection, lights, leak detectors, weather station, energy monitoring,...
Do also have a n100 processor running proxmox with 3 VM. Can't try right now but can come back in a few days to let you know how much power it draws
Have you tried to press Enter to show bios setup? (Don't have one, but that's what a quick search tell)
i don't know any on computer but some app offer that on android/ios. i guess they look for some kind of contrast pattern to determine each frame.
Did try and it does work really well on some but not all garphics novel / comics