Changed the hot end? Like just the brass nozzle tip? Or the what?
Either way if pla isn’t printing below 220 I’d start with a pid autotune. This will let you see if the hot end is actually doing what it should.
This site:
https://teachingtechyt.github.io/calibration.html
Has all the steps for tuning a printer, pid and e steps are listed. It’s worked well for me on my old Ender3 Bowden drives and many of my newer direct drive ones.
What printer do you have?
Everybody says that threshold is the worst voyager episode, but what my theory presupposes is… maybe it’s distant origin….
(Taps mic…..) uh yeah… in season 3 episode 23 of voyager, we’re supposed to believe that dinosaurs invented deep space travel and made it to the delta quadrant with zero evidence in the fossil record to support that the dinosaurs were even intelligent enough to create any sort of basic technology, let alone rockets. So how? I’ll take my answer off mic….
It’s referring to a process called the 4:6 method invented by Tetsu Kasuya.
Deep Rock Galactic, I play it exclusively on single player with the little robot buddy. On easier modes it’s pretty chill and pauses well if you need to stop in the middle of a mission.
Sable is just a relaxing exploration game. No real combat, just riding through a desert on a hover bike. Cool art style.
Inscryption is a creepy deck builder, with some wild turns. Don’t look up much or spoilers abound.
Moonring is a free old school rpg. Graphics are classic but the game is a great throwback with some modern gameplay.
“Cue Ice cream truck music”
To your printer.cfg I’d add:
[exclude_object]
Allows you to cancel individual items. If you have multiple items printing and one fails in one way or another you can cancel just that object and continue the rest of the print. Literally the only thing is add the bracketed thing to the cfg and it’ll add a icon next to the pause button that gives you the options.
Meh on the next part. I see that version doesn’t have bed level knobs. I’ll leave it if there is someone else who doesn’t know about it.
I’ve also found that one of the bed screw leveling options is very helpful for getting the bed close enough for the bltouch to really be dialed in. I use
[bed_screws] Screw1: 32.5, 202.5 Screw2: 32.5, 32.5 Screw3: 202.5, 32.5 Screw4: 202.5, 202.5
Then in the console run: bed_screws_adjust
Just moves the nozzle to each of the four corners right above the leveling knobs. Makes it pretty simple. I will add that the coordinates I use are fore a ender3pro but should be the same ish for you. But don’t quote me on that.
Sounds like “water hammer”. If you google that others can give a way better explanation of why it happens.
I fixed mine by closing the main at the street, and opening the faucet highest and furthest from the main. In my house that was an upstairs faucet at the opposite corner from the main. Released all the pressure and then turned back on the main. Noise left and hasn’t come back for 6~ months. There are knock arresters you can install or have installed that stop the problem before it happens.
https://museumoftheredriver.org/acro/