316
submitted 1 week ago* (last edited 1 week ago) by [email protected] to c/[email protected]

Got a cheap new bed frame and headboard from china for ~$100. Not the best but it doesn't let me stub my toe.

Made:

top 41 comments
sorted by: hot top new old
[-] [email protected] 20 points 1 week ago

I’ve been using one of these style for almost 10 years. Nothing wrong with them whatsoever.

[-] [email protected] 14 points 1 week ago* (last edited 1 week ago)

I stub my toe a lot, so I’m hoping the “floating” style will help.

[-] [email protected] 18 points 1 week ago

Yeah, now you can bang your shins instead!

[-] [email protected] 7 points 1 week ago

Oh, I didn’t even notice the floating part! I dig that, and I am due for an upgrade.

[-] [email protected] 1 points 1 week ago* (last edited 1 week ago)

I recommend this stuff to wrap around the legs if you still find yourself stabbing your toes. We have it on all the beds/furniture in our house and it's fantastic, you can cut it to size and it sticks to itself/stays in place!

[-] [email protected] 1 points 1 week ago

You need to add an exclamation mark before the if you want to embed an image, like this:

![](https://lemmy.world/pictrs/image/5c3d36db-33e7-475f-9424-65edd46466ac.jpeg)

[-] [email protected] 4 points 1 week ago

Some are even the exact height of common storage tubs!

[-] [email protected] 3 points 1 week ago

I feel this in my university days.

[-] [email protected] 15 points 1 week ago

Hell yeah. As far as unsolicited advice goes: invest in a good mattress and pillows as you go. The frame is whatever, but what's under you while you sleep, sit, and walk is very valuable.

[-] [email protected] 8 points 1 week ago

Everything that goes between your feet and the ground. Socks, shoes, chairs, mattress.

[-] [email protected] 14 points 1 week ago* (last edited 1 week ago)
[-] [email protected] 4 points 1 week ago

I ain't got money to spend on hookers, i wouldn't know

[-] [email protected] 4 points 1 week ago
[-] [email protected] 5 points 1 week ago

That too. And brakes. Both very important when it comes to stopping several tons of metal.

[-] [email protected] 7 points 1 week ago

My partner and I have a like 5” memory foam topper and it turned our bed from “comfort” to “impossible to leave”

Would recommend

[-] [email protected] 5 points 1 week ago

Thats what I have on this but 4”. I love it.

[-] [email protected] 13 points 1 week ago

Had one of these bed frames a few years back. Fine for sleeping but I'll just say they don't hold up very well to adult activities.

[-] [email protected] 12 points 1 week ago

Mattress goes on top, not on side silly

[-] [email protected] 10 points 1 week ago

I recommend putting a rug underneath so as not to scrape the floor. Also I broke at least two similar looking bedframes having sex in them, so either don't or just put the mattress on the floor

[-] [email protected] 15 points 1 week ago

Excuse me sir, this is dull men’s club. None of us are having bed-breaking sex.

[-] [email protected] 3 points 1 week ago

You don't need to try that hard with these guys.

[-] [email protected] 8 points 1 week ago

Should be fine, just might need to retighten the bolts after a couple months once like anything else.

[-] [email protected] 7 points 1 week ago

I'll highly recommend "blue" loctite (removable) or similar. It adds enough friction to the threads to keep them from backing out by themselves, but even a small amount of force from a tool will break it free again.

No more squeaks for the neighbors to overhear.

[-] [email protected] 6 points 1 week ago

The true old skool technique is actually a single silk thread through the fastener first. A single old tie from a thrift store will last a lifetime. Silk thread was used in all kinds of things in automotive and aviation before gaskets were really a thing. It is tough, thin, and just plastic enough to deform in very tight compressed spaces, but it must be real silk and not synthetic.

[-] [email protected] 5 points 1 week ago

Interesting!

I'd heard of using silk thread as a gasket maker (I had to split cases on a motorcycle engine and some old geezer mentioned that they used to use silk, but to just use RTV now), but not as a thread locker. I suppose the same principal applies, I just never gave it thought!

[-] [email protected] 4 points 1 week ago

Silk is still used in some old aviation applications when it was originally specified and is sometimes preferred in racing. The service life is just shorter than gasket maker. Longer service-life solutions were needed with more modern casting techniques over the last couple of decades. Older stuff out of Detroit had poor old sand casting techniques that caused larger stack tolerances and lead to shorter service life. Modern stuff is nearly investment cast. It uses very strong binders and interlocking connections that prevent shifting and floating issues caused by large quantities of heavy molten metal. Old cheaper sand castings are not strong enough to form such connections. In aviation, everything is serviced with preventative maintenance, so the service life is tightly regulated and far shorter than silk will degrade. Likewise with racecars that will be rebuilt periodically.

It is a cool hack to know you could grab a spider web in the wild and have thread locker or seal a surface in a pinch.

[-] [email protected] 6 points 1 week ago

I like the no-stub feature. TBH this frame looks like one I would haphazardly design, so either they're as bad as me or I'm better than I thought!

[-] [email protected] 5 points 1 week ago* (last edited 1 week ago)

That is one THIIIIC mattress! Get some more pillows for sure. Like 4 minimum, ideally 6. Also, get a rug for the floor. Much nicer stepping out of bed onto a plush rug.

[-] [email protected] 5 points 1 week ago

Nice frame but I would be too scared to go with that headboard choice. My feline roommates would definitely turn that into a scratching post!

[-] [email protected] 3 points 1 week ago

Didn’t even think about that. I guess I’ll see what happens.

[-] [email protected] 3 points 1 week ago

Does look like a scratching post/board thing lol

[-] [email protected] 3 points 1 week ago

That looks great! $100 is a steal.

[-] [email protected] 3 points 1 week ago

Now to install the bass shaker engine.

[-] [email protected] 2 points 1 week ago

Looks sturdy. Bet it doesn’t squeak.

[-] [email protected] 2 points 1 week ago

I sleep in a bed. It's nice.

[-] [email protected] 1 points 1 week ago

That's awesome - well done.

[-] [email protected] 1 points 1 week ago* (last edited 1 week ago)

I just got a new bed, and the frame has squared cups at all of the junction points. All you do is drop the frame prices together into the cups and it's done! No tools or anything needed. It's nice heavy plastic too.

[-] [email protected] 1 points 1 week ago
[-] [email protected] 2 points 1 week ago

I sweat enough with that thin little thing.

[-] [email protected] 2 points 1 week ago

The thinner the better

[-] [email protected] 1 points 1 week ago

I just assembled a VERY similar looking one with different materials a couple weeks ago. Mine had a plywood and denim facade around the steel frame, and two dozen 2x4s to support the mattress. I think it was around $200 from a local furniture store. Im guessing they imported it. Lol

this post was submitted on 04 Jun 2025
316 points (97.3% liked)

Dull Men's Club

2515 readers
219 users here now

An unofficial chapter of the popular Dull Men's Club.

https://dullmensclub.com/

1. Relevant commentary on your own dull life. Posts should be about your own dull, lived experience. This is our most important rule. Direct questions, random thoughts, comment baiting, advice seeking, many uses of "discuss" rarely comply with this rule.

2. Original, Fresh, Meaningful Content.

3. Avoid repetitive topics.

4. This is not a search engine
Use a search engine, a tradesperson, Reddit, friends, a specialist Facebook group, apps, Wikipedia, an AI chat, a reverse image search etc. to answer simple questions or identify objects. Also see rule 1, “comment baiting”.

There are a number of content specific communities with subject matter experts who can help you.

Some other communities to consider before posting:

5. Keep it dull. If it puts us to sleep, it’s on the right track. Examples of likely not dull: jokes, gross stuff (including toes), politics, religion, royalty, illness or injury, killing things for fun, or promotional content. Feel free to post these elsewhere.

6. No hate speech, sexism, or bullying No sexism, hate speech, degrading or excessively foul language, or other harmful language. No othering or dehumanizing of anyone or negativity towards any gender identity.

7. Proofread before posting. Use good grammar and punctuation. Avoid useless phrases. Some examples: - starting a post with "So" - starting a post with pointless phrases, like "I hope this is allowed" or “this is my first post” Only share good quality, cropped images. Do not share screenshots of images; share the original image.

.

founded 6 months ago
MODERATORS