Pop_OS won't detect an external SSD (lemmy.ml)

submitted 1 week ago by [email protected] to c/[email protected]

8 comments fedilink hide all child comments

I plug in an external 1TB Crucial X8 portable SSD via USB but the OS can't detect it. I used to use the SSD as external storage for a PS4. I can plug it into my phone and a Chromebook and both detect the drive automatically. I've tried reformatting the drive via my phone and the Chromebook, I have connected it via 3 different USB ports, and tried another USB cable, all with no success.

What else can I try?

you are viewing a single comment's thread
view the rest of the comments

[-] [email protected] 2 points 1 week ago

fdisk -l does not detect the drive.

dmesg | less says:

[ 397.817177] usb 1-2.2: new high-speed USB device number 8 using xhci_hcd [ 398.008829] usb 1-2.2: New USB device found, idVendor=0634, idProduct=5600, bcdDevice= 1.00 [ 398.008836] usb 1-2.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 398.008839] usb 1-2.2: Product: Crucial X8 SSD [ 398.008842] usb 1-2.2: Manufacturer: Micron Technology Inc [ 398.008844] usb 1-2.2: SerialNumber: 1950E328848A [ 398.050672] scsi host7: uas [ 398.941402] scsi 7:0:0:0: Direct-Access Micron Crucial X8 SSD 0 PQ: 0 ANSI: 6 [ 398.944414] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 400.317609] sd 7:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 400.317757] sd 7:0:0:0: [sde] Write Protect is off [ 400.317760] sd 7:0:0:0: [sde] Mode Sense: 43 00 00 00 [ 400.318003] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 400.318081] sd 7:0:0:0: [sde] Preferred minimum I/O size 512 bytes [ 400.318086] sd 7:0:0:0: [sde] Optimal transfer size 33553920 bytes [ 400.325350] sde: sde1 [ 400.325432] sd 7:0:0:0: [sde] Attached SCSI disk [ 444.986115] usb 1-2.2: USB disconnect, device number 8 [ 445.013859] sd 7:0:0:0: [sde] Synchronizing SCSI cache [ 445.175859] sd 7:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 450.120178] [UFW BLOCK] IN=enp4s0 OUT= MAC=01:00:5e:00:00:01:48:5d:36:2c:51:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=47108 DF PROTO=2 [ 575.140669] [UFW BLOCK] IN=enp4s0 OUT= MAC=01:00:5e:00:00:01:48:5d:36:2c:51:00:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=43202 DF PROTO=2

this post was submitted on 02 Jun 2025

12 points (92.9% liked)

Linux Questions

1974 readers

1 users here now

Linux questions Rules (in addition of the Lemmy.zip rules)

stay on topic
be nice (no name calling)
do not post long blocks of text such as logs
do not delete your posts
only post questions (no information posts)

Tips for giving and receiving help

be as clear and specific
say thank you if a solution works
verify your solutions before posting them as facts.

Any rule violations will result in disciplinary actions

founded 2 years ago

MODERATORS

[email protected]