188
submitted 1 week ago by [email protected] to c/[email protected]
you are viewing a single comment's thread
view the rest of the comments
[-] [email protected] 18 points 1 week ago

Cool idea, but also basically the worst shape to use a 3D printer for. Those things will crumble as soon as they experience any sort of real world load in a slightly wrong direction.

[-] [email protected] 15 points 1 week ago* (last edited 1 week ago)

There's not much reason for a trimmer guide to experience meaningful load.

[-] [email protected] 3 points 1 week ago

Pretty sure these would break just from sliding it on and off, getting it caught on beard hair or skin or dropping it from a like 30cm.

[-] [email protected] 9 points 1 week ago

I don't know what you've experienced, but I have been 3d printing things for about 6 years now. With any decently tuned printer, these would be fine for the use they will get. I have the one razor they have released a part for, and the 3d printed parts are not going to experience much in the way of force that would separate the layers. It doesn't help that I don't think they followed their own guidelines when printing the examples. The layer height is huge which makes the layer lines stand out. I bet that was so they could more easily be identified as 3d printed with an FDM printer, but it looks really bad.

[-] [email protected] 8 points 1 week ago

I just measured the red ones original dimensions with calipers and the individual comb parts have 0.5mm at their thinnest and 1mm at their thickest. My 3D printing is not perfect, but i just dont see how that is gonna survive. Maybe i will try on the weekend and let you know how it went.

[-] [email protected] 7 points 1 week ago

I'll give it a shot too, since I have the razor for the one model they have released

https://www.printables.com/model/1289421-philips-fixables-oneblade-1-3mm-comb

[-] [email protected] 10 points 1 week ago

It looks like they made those thin sections roughly 2x wider in the stl files to strengthen it. That makes me a little more optimistic.

[-] [email protected] 10 points 1 week ago

It was a super fast print (about 16 minutes) so I went ahead. I think it'll be fine, and I even had a random layer issue on the back side. Put it on the razor, and it used the angle of the blade to lock it in place, so I don't think there will be much issue.

Lemmy is not letting me upload images on mobile, but I'll see if I can do it on desktop

[-] [email protected] 1 points 1 week ago

They havent released one for the razor I have, but honestly I might try modeling them myself. Doesn't seem impossible, and I've been waning a deeper comb than they sell.

[-] [email protected] 1 points 1 week ago

They aren't wildly complex, don't would be dobale for sure

[-] [email protected] 3 points 1 week ago

What kind of "real world load" are you putting on your trimmer? Mine barely ever gets caught in hair, and when it does, the hair gets cut before it can apply any meaningful amount of force to the trimmer guard.

[-] [email protected] 2 points 1 week ago

Well, I doubt they'll release one for my clippers since they're discontinued, so that inspired me to go ahead and model a variable-depth one for myself. Based on some of the comments here, I thickened the comb blades to make them print more easily.

this post was submitted on 21 May 2025
188 points (99.5% liked)

Technology

38779 readers
225 users here now

A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.

Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.

Subcommunities on Beehaw:


This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 3 years ago
MODERATORS