this post was submitted on 07 Aug 2023
498 points (100.0% liked)
Technology
37716 readers
290 users here now
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Subcommunities on Beehaw:
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Alkalines leak a lot and they seem to be worse these days than they used to. From personal experience, there is about 1:10 chance you'll be scrubbing battery contacts after using Alkaline. And if you forget to remove the battery when the device goes into storage, there is about a 100% chance it will be a crusty mess once you look at the device again, it can take years, but it's pretty much unavoidable.
NiMH don't leak, or at least much less frequently with much less catastrophic results. Also with modern low-self-discharge ones (Eneloop, Ikea LADDA) they last years, so they are very usable in TV remotes and the like.
There are a couple of rare devices that really want 1.5V to function properly (e.g. WMR Controller), in those cases 1.5V LiPo batteries can make a good rechargable alternative, but they are substantially more expensive than plain NiMH.