Soldiem_Vulpes

joined 11 months ago
 

Recently installed and got my home MoCA network running (Previous post: https://www.reddit.com/r/HomeNetworking/comments/17zr419/new_moca_network_issues/), which once installed correctly I was getting speeds up to 550 Mbps down (I pay Spectrum for 500 down).

However, right before Thanksgiving, speed dropped to around 90-100 Mbps consistently regardless of time of day or device (both wired and wireless). I figured I had a bad coax cable somewhere and replaced a few, but was still getting this speed.

Had a spectrum tech come out, and together we traced the problem from the tap through the network, and it seems to die off right at the router. The tech suggested I buy a new router but I'm wondering if its just a settings issue. For reference, I have a Netgear Nighthawk R7000. I've already logged in and double checked that the firmware is up-to-date.

Other thoughts I've had that could be causing the problem:

  1. I recently purchased a VPN subscription to NordVPN but have never used a VPN before, and I'm unsure if I need to change router settings for this.

  2. One of the ethernet ports connects to our solar panels, which only communicate at 100 Mbps, could this be influencing the rest of the network?

  3. Actually is the router itself, and I need to buy a new one. Suggestions?

As always, any help is much appreciated!

 

Good morning y'all! Working on setting up a MoCA setup in our new house and running into some issues during setup. Using these MoCa gocoax 2.5 adapters but seem to a having a splitter problem. I know MoCA adapters need to communicate on a frequency up to 1675 MHz so I bought these Splitters, one 4-way and one 2-way, thinking they would work. Once installed, the MoCA adapters are communicating but I'm getting intermittent connectivity and extremely slow internet. I had a spectrum tech out and he seemed to think that the issue was in the splitters because the signal all but died after hitting the 4-way.

Wondering if y'all think I should order these splitters to see if they work, or if y'all see any other issues from my diagram. For reference, I'm using a Spectrum Modem E31T2V1 but my own Netgear Nighthawk router.

Any help would be appreciated!

https://preview.redd.it/cotvlbo2vi1c1.jpg?width=3024&format=pjpg&auto=webp&s=05d8677f155832bb7ad4bde7dbd1ca1df3b9e999