3DPrinting

15512 readers

178 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: [email protected] or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

[email protected]

Question about Z screw coupler (lemmy.world)

submitted 9 months ago by [email protected] to c/[email protected]

7 comments fedilink hide all child comments

Hi all, I have a quick question about my z screw coupler (as i understand it, the metal cylinder at the bottom you can manually move your z axis up and down with).

When I manually raise the z axis (with steppers disabled) by rotating the coupler clockwise, after I let it go, it reverses it's rotation on it's own and sinks back down. This is frustrating because it takes forever to actually move it any distance. Am i doing anything wrong? Should you only ever move the z axis with software, and if so, is there a way to fix the issue of it going back down? I don't know how to adjust the tightness of this part, I'm still pretty new.

top 7 comments

sorted by: hot top controversial new old

[–] [email protected] 2 points 9 months ago (1 children)

I suspect the weight of your build platform is sufficient enough to turn the Z axis leadscrew against gravity and overcome the friction within it and the motor. I've never seen a printer do that myself, so I don't know if that's indicative of any kind of failure on your particular model. When the stepper motor is energized it holds itself in position which is why this doesn't happen, for example, during a print.

If I were you I would just move the bed via software or your printer's control panel if it presents the option. That should be safer, faster, and not slowly give you carpal tunnel as an added bonus. I haven't done the math via figuring out the screw thread pitch and so forth, but for example my X-Max 3 has a total Z axis travel of something like 330mm, so it would take an entire month of Sundays and hundreds of manual revolutions to screw the damn thing from bottom to top by hand. I have a machine precisely for doing that for me...

[–] [email protected] 1 points 9 months ago (1 children)

Thanks, that's probably the route I will take. Just wanted to know if that behavior was abnormal or not, but it sounds like it's not too far outside the realm of people's experiences in general

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago)

Probably.

FWIW with the motors unlocked I can just push on my print bed either up or down, and it'll move. Mine just doesn't move under its on weight. Maybe it would if it had a big model on it or something, I dunno.

If yours is a bed-slinger gantry machine where the head moves up and down rather than the print bed, the same applies. Just in reverse.

[–] [email protected] 1 points 9 months ago* (last edited 9 months ago) (1 children)

It happens, and has happened to me while moving it manually, especially if I stop and let go abruptly. If I do it gently, it’ll stay in place. It also happened a few times when I didn’t screw the Z coupler properly so it just spun out. The weight of the print head along with the general resistance and stepper rotor magnetic resistance should be enough to make it stay still, and I assume it stays still as well when you turn off the printer. Or does it just crash onto the build plate?

[–] [email protected] 2 points 9 months ago

I don't recall it ever crashing, with the printer on or off. I can test explicitly what it does when the printer is off, when my current print finishes

[–] [email protected] 1 points 9 months ago

If you have only one Z screw you are fine. But if you have 2 Z rods with stepper motor on each one, they can get out of sync when losing power. You can print Z motor brake to solve that problem

[–] [email protected] -1 points 9 months ago

New Lemmy Post: Question about Z screw coupler (https://lemmy.world/post/10541536)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md