102
top 19 comments
sorted by: hot top new old
[-] arcine@jlai.lu 1 points 3 minutes ago

I generally despise mergers and acquisitions, but I'll try to keep an open mind as I don't know the whole context here, so it could be a very rare case of an improvement.

[-] phoenixz@lemmy.ca 13 points 1 day ago

Something taking over another something usually doesn't end up well for the user's.

[-] Kushan@lemmy.world 12 points 1 day ago

True but thingiverse has been neglected for years now. Printables, Maker world, thangs, etc. are much better sites with a much better user experience.

Thingiverse was dying before this take over, so hopefully they'll improve it.

If not, there's plenty of competition out there.

[-] NutinButNet@hilariouschaos.com 31 points 2 days ago

As part of our commitment to SoulCrafted content, MyMiniFactory has adopted a zero-tolerance stance on AI generated content on our platform.

Thingiverse is now a SoulCrafted platform. In practice, that means we'll be taking steps to reduce and eventually remove AI-generated designs from the site.

That is really interesting. I wonder how they are going to find those and remove.

Even before the boom of AI, I remember seeing a lot of random crap of unusual shapes just being added together and uploaded. I wonder if they’ll remove those too.

[-] Lexam@lemmy.world 25 points 2 days ago

I hope they overhaul Thingiverse's user interface.

[-] Postmortal_Pop@lemmy.world 18 points 2 days ago

Fuck me, I love the site but the UI makes borderlands 1 look like a masterpiece.

[-] Imgonnatrythis@sh.itjust.works 8 points 2 days ago

There's 3d printing as art, but then also 3d printing for utility. I use it primarily for the latter. For art I don't want AI generated junk, so filtering that is ok, but I usually won't like it if it's Ai generated and can pick it out anyway. I don't want barriers in Ai generated things like tool parts, shelf, etc. Though. All I care about there is quality. I want someone to have tested and reviewed it at least, but I'm not dogmatic at all about whether Ai produced it. I think the 3d printing community cares more about quality control on model libraries than just Ai gatekeeping.

[-] LastYearsIrritant@sopuli.xyz 17 points 2 days ago

Nearly every 3d print that has an AI generated tag also has no actual pictures of a printed part.

I think people just AI generate, than assume it's fine and post it, but never actually print it.

That's why I keep the "no AI" filter on, really cleans up the junk posts.

[-] Auli@lemmy.ca 1 points 2 days ago

How I tried to get AI to generate an openscad file and it sucked.

[-] prenatal_confusion@feddit.org -2 points 2 days ago* (last edited 2 days ago)

There is a render. I assume if the algorithm is "smart" enough to create a mesh it can also evaluate the overhang angle at every given point. I suspect they do. But yes it's a good way of telling if anybody actually wanted to make this object or just habe a nice upload.

[-] LastYearsIrritant@sopuli.xyz 9 points 2 days ago

No, that's the problem. The algorithm is NOT good enough to determine if it is printable.

People assume this and upload tons of crap models.

[-] prenatal_confusion@feddit.org 0 points 1 day ago

Sorry but I can't believe that. The slicer itself can determine what overhang needs support so it's programmatically possible. Even if the AI hasn't been explicitly trained to do the same it would have scanned the code for slicera and "learned" (more like stole) it itself.

I am curious now. What is a state of the art AI tool to do stl? I think I will take a dive into this area

[-] Apepollo11@lemmy.world 6 points 2 days ago

I'm in a tricky position here.

I use MyMiniFactory, have backed several frontiers things and am a member of a few tribes.

I also use Thingiverse a lot.

And while I certainly don't want to pay for AI content, I don't mind that much if it's free. There have been times that I've looked for something for DnD and the only option was AI generated. And honestly, I'd much rather have that than no model at all.

[-] roofuskit@lemmy.world 9 points 2 days ago

There are LOTS of other places STLs are hosted. The dregs will move to new hosts.

[-] Auli@lemmy.ca 3 points 2 days ago

Yah thingiverse kind of fell off of my radar over the years with printables.

Could you explain to me what the issue here is and how does AI enter into it?

[-] Apepollo11@lemmy.world 16 points 2 days ago

In the linked article, MyMiniFactory say that they'll ultimately be removing AI content from Thingiverse.

Oh. I thought I read the whole article. How did I miss that part.

Well, thanks.

[-] TheButtonJustSpins@infosec.pub 1 points 2 days ago
this post was submitted on 13 Feb 2026
102 points (99.0% liked)

3DPrinting

21567 readers
169 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS