Floppy drives don't use IDE, they use their own type of connector ( called a floppy connector), I've never seen a Sata to floppy adaptor, but you can connect a usb to floppy adapter to an internal usb header
this post was submitted on 18 Oct 2023
50 points (100.0% liked)
Linux
48039 readers
801 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
Yes USB is the way to go, cheap and effective: https://www.aliexpress.com/item/1005002747925791.html
Also the native Linux driver for floppy drives is on its way out: https://itsfoss.com/end-of-floppy-disk-in-linux/ note that USB solutions will still work.
+1 for the internal usb header tip.
I have an ide floppy, ls120 which reads 720k and upwards. No issues under Linux
SuperDisk™? 😏
It's derived from the old shugart interfaces IIRC. But yes not IDE. I'm sure a converter is possible but USB makes more sense these days, or if you must an FDD controller card (assuming no motherboard support).
Do yourself a favor and just use a USB floppy drive 👍
Wow, floppies.
I would suggest looking for a 3.5" unit rather than 5.25", the small floppies are sturdier.
Even so a floppy can get corrupted at any time so personally I wouldn't bother with a filesystem and mounting it, I'd just write a bunch of numbers in various places on the disk and attempt to read with dd from several spots.
If you want to go with a filesystem and mount, please be aware that floppy units don't send a signal when you load a floppy, like CD units do. You just have to try and see if there's anything in there.
You can use automount to mount a floppy when you access a directory but it's more trouble then it's worth imo.
Oh and it also takes a while for the drive to probe and access the floppy (can take 5-10 seconds).
If you want my opinion, I'd do anything except actually having to bother reading floppies. 🙂 I would look into an USB smartcard reader and use smartcards instead.
If that's not cool enough and you really want to use floppies, I'd conceal an USB NFC reader inside the PC and stick NFC tags to the floppies and load them inside the unit purely for the cool factor, without actually hooking up the floppy drive. Not sure if they'll be easily readable from inside the drive but I'd try, like I said I'd do anything. 😄
using nfc reader and tagged 'disks' is an interesting idea.
From one perspective, it should work; from another I never thought about how SATA/IDE adapters exactly work in this regard. Would any old one work, or most, or (almost) none at all?
Just to add this idea, I've used internal floppy drives with USB connection in the past, to attach in systems that don't have an old style floppy connector.
P.S.: Love the idea! I'm also a great fan of haptic/physical interfaces.
No idea how to do this properly, but it's definitely possible. Maybe a USB to IDE adapter makes more sense than going through SATA as it can just expose the floppy drive as a USB stick.
But then again CD drives have been around for ages as well and work properly on linux, so do your research.
The steps will probably look like this:
- Autodetect when a floppy is inserted
- mount it (possibly combined with the first step)
- automatically run a script after mounting
- writing the script, which will read the contents of the drive and control your player (chatGPT should be able to do that for you with a bit of trial&error)
The floppy drive is seen automatically and still fully supported in Debian 12 x86_64. You might have to mount the diskette to actually read it, but you can do that in fstab to do it on boot or ondemand or mount it manually.
What interface are you using? USB or FDD?
FDD
I’ve tried using a floppy on arch recently using a usb and a usb adapter with an original drive.
It works rather well, but it’s seen as a root drive. So long as you can give yourself root access it’s all good.
On that note you should get one of those internal usb 2 to female usb headers as it can allow you access if there isn’t a free usb port available
You should be able to get it to automount with autofs and unmount when it hasn't been read for a certain amount of time. I would suggest mounting the disks read only so they don't get corrupted it they are removed without unmounting them though.