this post was submitted on 13 Jul 2023
266 points (95.2% liked)
Asklemmy
43858 readers
1688 users here now
A loosely moderated place to ask open-ended questions
Search asklemmy ๐
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- [email protected]: a community for finding communities
~Icon~ ~by~ ~@Double_[email protected]~
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
That would be awesome! I've got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I'm just trying to find that perfect spot to where it extrudes but doesn't grind filament. I've been having some really messy prints.
I just had a feeler gauge arrive in the mail, so I'm about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.
I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?
Sure thing, I have a two Sovol SV06's, one for a 0.4 nozzle and one for a 0.2 nozzle, and a Bambu Labs X1C.
The SV06's took me a few weeks to tweak, especially the one with the 0.2 nozzle.
Here is my cura profile for the Sovol SV06 with the 0.4 nozzle https://filebin.net/ljh52w2lehipzbms
Just using that outright probably won't work. What I would do is load up the default Ender 6 profile that Cura has, and then adjust settings based on mine. For instance. You went from a bowden extruder to a direct drive. So you can probably copy my retraction settings as a baseline and adjust from there. You need far less retraction on direct drive extruders (i.e. 0.2mm-1mm for direct drive vs 5mm-8mm for bowden).
I would also look up CHEP and Teaching Tech on youtube. They have great videos on bed leveling and everything else related to 3d printing.