1539
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 14 May 2026
1539 points (99.2% liked)
Technology
84816 readers
3896 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related news or articles.
- Be excellent to each other!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, this includes using AI responses and summaries. To ask if your bot can be added please contact a mod.
- Check for duplicates before posting, duplicates may be removed
- Accounts 7 days and younger will have their posts automatically removed.
Approved Bots
founded 2 years ago
MODERATORS
As the owner of a Snapmaker2 A150 (that is, one of their second-gen multifunction devices, fairly old now), I can say that my experience with it has been decent enough. It speaks a lightly modified Marlin dialect and can be run completely offline. New firmware requires user permission. They did release the source for the firmware and for their custom slicer (not worth it), and some of the more adventurous owners did manage to flash it with modified firmware. There were a few complaints at the time about the hardware not being as open as people had hoped, mostly because of custom connectors and the like.
Hardware-quality-wise, it was kneecapped by needing to be solid enough for CNC, so it's slower and heavier than a purpose-built printer would need to be, but the prints are of decent enough quality for a device of its age and type.
Could you please give your thoughts on its milling and laser capabilities? Do you own the 4th axis rotary?
The A150 is too small to mount the rotary—you need at least an A250, but there were no longer any of the midsize units available by the time I hit the kickstarter and I didn't have the space for the A350, so I opted for the smallest model.
Embarassingly, I've used it mostly as a 3D printer. The blue diode laser originally shipped with the unit is a decent etcher but too weak to cut through anything very thick (best I've heard of anyone managing was 1/4" of wood, and that took a lot of passes and patience on their part), and it has some limitations on what materials it will handle (I'd have to scour the forum for details, because it's been a while). I didn't buy the more powerful laser that later became available as an add-on. Unless their software has improved a lot since the last version I downloaded, you'll need 3rd party software to make the most of it.
I never actually tried milling with it because of potential dust removal issues, but according to reports it once again suffers here from being a compromise device with limited software. The frame isn't quite as rigid as a dedicated CNC, the bits are Dremel-sized and a bit fragile due to that, and the provided software I have won't, for instance, handle what should be simple tasks like drilling all-vertical holes or doing multiple passes with different-sized bits. Unlike the laser, I can't recall any reports of anyone using alternative CAM software for the CNC, but it's been a couple of years since I last looked.
In the end it's kind of like a Swiss Army knife: great if you have limited space (my issue) and just want to try stuff out, but if you can manage it you're better off with dedicated machines for each function.