242
IKEA moves to Thread (and away from Zigbee)
(www.theverge.com)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 09 Jul 2025
242 points (99.6% liked)
homeassistant
15278 readers
62 users here now
Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.
Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation
Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @[email protected]
founded 2 years ago
MODERATORS
So, if I'm invested in zigbee, but want to future proof, I should consider threads/matter, and a hub that talks to both?
Can home assistant do that?
Yes if you have a Zigbee and a Thread antenna module connected to your HA instance you can run it as an Zigbee and Matter hub and connect Zigbee and Matter devices. A cheap antenna module is the Sonoff ZBDongle-E. You can flash the firmware of it and turn it into a Thread antenna module. It can also run as a Zigbee and Thread antenna simultaneously, but I never got that working properly. So I just bought two dongles. One for Zigbee and the other for Matter.
You can flash the SLZB-06 to use Matter over Thread too. I like those because they use Ethernet and can be powered via PoE, so you can put them practically anywhere you can reach using an Ethernet cable.
Thanks. I'll look into it. Right now I have mainly lights and sockets, through a Lidl zigbee hub, a rebranded Tuya, I believe, but I'm looking into going a bit deeper.
Hows that working software-wise in HA? One running in Z2M, the other ZHA?
I'm not running Z2M and ZHA together though. Just ZHA and Matter. But I've read that running Z2M and ZHA with two dongles is no problem in HA you just have two separate networks