27
Devices continuously dropping off my ZigBee network (lemm.ee)
submitted 1 week ago by [email protected] to c/[email protected]
31 comments fedilink hide all child comments

I recently setup my ZigBee network in Home Assistant, using a Conbee III with deConz on my Synology NAS.

I purchased a few Aqara Temperature sensors and a couple of Mini Switches.

I was able to get them to pair just fine, but they won't remain online for more than a couple days. They then drop off and I can't even reconnect them easily. I need to try to pair them again like 10 times before they come back online.

At this point I don't know if the problem is my network, the Conbee III, deConz, or the Aqara devices.

I don't know much about ZigBee, but a couple things that I tried so far were:

  1. Use a USB extender instead of connecting the Conbee III directly to my NAS.
  2. Bring the devices as close a possible to the gateway. I don't have a big home, so I don't think distance is a factor here, but still, I put of the sensors right next to the gateway, and it would still drop after a while.

Do you have any hints on things to try to get this fixed, or at least identify the problem?

you are viewing a single comment's thread
view the rest of the comments
[-] [email protected] 1 points 1 week ago

My experience is that Zigbee's range is fine, but it is highly susceptible to interference/electrical wires/water pipes that might be in walls. I put my Conoff dongle on a 12 ft USB extension (my HA Raspberry Pi is right next to my router, modem, and home server). Then, as I was having issues with devices staying connected, I added routers. I tried to place them so they had clear line of sight with each other (or the dongle), or only through one wall. After that, I've had no problems. It ended up being about one per room. Ikea's smart plugs are cheap and I use them only as routers.

this post was submitted on 01 Jun 2025
27 points (100.0% liked)

homeassistant

14749 readers
27 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
[email protected]
[email protected]