Linux PC build (2025)
Hello,
it's me again. Some of you might remember me from this post, in which I was asking for feedback to build a Linux PC in 2025.
Stuff happened and I didn't went through with it. So this still my first attempt at a build. Well now I've got time and want to try it again.
As you may notice, I've ditched the Z790-9 mother board in favor of a MSI PRO B650M-P. My dream of building a coreboot-system is officially dead, thus I decided to build an AMD-System.
Short Listing:
- CPU: AMD Ryzen 7 7700X 4.5 GHz 8-Core
- CPU-Cooler: Thermalright Assassin X 120 Refined SE 66.17 CFM CPU Cooler
- Mother board: MSI PRO B650M-P Micro ATX AM5 Motherboard
- Memory: Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory
- Storage: Acer Predator GM7000 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
- GPU: Sapphire 21323-01-20G Radeon RX 7900 XT 20 GB Video Card
- Case: Zalman P10 MicroATX Mini Tower Case
- PSU: Thermaltake Toughpower GF1 (2024) 850 W 80+ Gold Certified Fully Modular ATX Power Supply
- Monitor: KOORUI 24E3 24.0" 1920 x 1080 165 Hz Monitor
If you notice anything wrong or have suggestions/improvements don't hesitate to point them out.
Thanks in advance!!!
Specifications:
-
CPU: AMD Ryzen 7 7700X 4.5 GHz 8-Core Processor
- Boost Clock: 5.4 GHz
- TDP: 105 W
- L2 Chache: 8 MB
- L3 Chache: 32 MB
- Socket: AM5
- iGPU: Radeon
- Max. Memory: 128 GB
- Arch.: Zen 4
-
CPU-Cooler: Thermalright Assassin X 120 Refined SE 66.17 CFM CPU Cooler
- RPM: 1550
- Noise: 25.6 dB
- Height: 148 mm
- CPU-Socket: AM5 and others
-
Mother board: MSI PRO B650M-P Micro ATX AM5 Motherboard
- Chipset: AMD B650
- Memory:
- Type: DDR5
- Slots: 4
- Speed: DDR5-6000
- Max.: 128 GB
- PCIe x16 Slots: 1
- PCIe x1 Slots: 2
- M.2 Slots: 2x 2260/2280 M-key
- SATA 6.0 Gb/s Ports: 4
- Onboard Ethernet: 2.5 Gb/s Port (Realtek RTL8125BG)
- USB 2.0 Headers: 2
- USB 3.2 Gen 1 Headers: 1
- USB 3.2 Gen 2 Headers: 1
-
Memory: Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory
- First Word Latency: 10 ns
- CAS Latency: 30
- Voltage: 1.35 V
- Timing: 30-40-40-76
-
Storage: Acer Predator GM7000 2 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive
- Cache: 2048 MB
-
GPU: Sapphire 21323-01-20G Radeon RX 7900 XT 20 GB Video Card
- Memory: 20 GB
- Memory Type: GDDR6
- Core Clock: 2000 MHz
- Boost Clock: 2400 MHz
- Interface: PCIe x16
- Length: 276 mm
- TDP: 308 W
- Cooling: 3 Fans
- External Power: 2 x PCIe 8-pin
- DisplayPort: 2.1 Outputs 2
-
PSU: Thermaltake Toughpower GF1 (2024) 850 W 80+ Gold Certified Fully Modular ATX Power Supply
- Length: 140 mm
- Wattage: 850 W
- EPS 8-pin Connectors: 2
- PCIe 6+2-pin Connectors: 6
- SATA Connectors: 8
- AMP/Molex 4-pin Connectors: 4
-
Monitor: KOORUI 24E3 24.0" 1920 x 1080 165 Hz Monitor
- Size: 24"
- Resolution: 1920 x 1080
- Refresh Rate: 165 Hz
- Response Time: 1 ms
- Inputs:
- 1x HDMI 1.4
- 1x DisplayPort 1.2
How did you list your hardware like that? Where it shows the key specifications for each part as bullet points, not the bullet points though, if that makes sense. I know how to make bullets, I mean the data.
Was is generated with a script or did you copy and paste individual part stats from their website specs or some other way?
I have a few ways to generate info, like with inxi or searching pcpartpicker, but there often there is not enough info, important info that is missing, far too much info about stuff I don't care about or I have to spend a lot of time searching for specific data and have to copy and paste each feature for each part individually which can be too time consuming.
What you have shows pretty much exactly what I would like, so I could easily share when needed.
I think pcpartpicker has different options to share with similar formatting that you could paste.