I love the feel of wax on furniture and have been using Johnson's paste wax for years. The big problem with paste wax is it smells fucking awful, like opening a gas can. This is no surprise since it is made from petroleum.

After my venture into milk paint I decided to see what else I might be able to do to detox my finishing options. Making my own wax seemed like a good place to start.

After a little bit of research I found a few recipes, almost all of which were the same-- one part beeswax and four parts oil, by volume. I used beeswax pellets which can be found at craft stores or online, though you could use blocks or even refine your own from comb surplus if you happen to know a beekeeper. Just cut it up so it melts easier. For the oil, typically you will see folks use linseed oil for this, which is hard to find, unless it's flax in which case it's super expensive.

I went to my local crunchy food store to try to find some flax oil and was shocked to find it's like 40 bucks a quart-- so instead settled on a $12 bottle of culinary hemp oil.

Most recipes call for heating the oil and wax together in a double boiler, then pouring it into the final containers. This is unnecessary and makes a mess-- pick a nice wide mouth glass jar to hold your finished product, then put the oil and wax in the jar and put the whole thing in the microwave. After a couple of minutes the oil will heat up enough to melt the wax, and when it's completely melted give it a stir and throw a lid on it-- boom you're done. No mess.

After it's hardened it can be used like normal paste wax. And folks let me tell you-- the hemp blend smells amazing. Don't be put off by the light green color-- it doesn't transfer at all.

It is a joy to use and the beeswax leaves a superior finish to the petroleum waxes, it's very grippy and smooth in the hand. I also love that I can eat it with no ill effects. The paste wax feels like it has to be aired out overnight just to let the smell dissipate.

You can also add pigment to it-- I added black iron oxide to a small jar and used it on all of my hand planes. Here is a before and after on my cheap scrub plane:

The black wax works it's way into the pores in the grain, creating a patina. I have also tried this with brown iron oxide and the effect is similar though it leaves a warmer and less muted finish. You can also add the same pigment that's in the milk paint of your choice, and get a really nice effect with the colors popping.

I am using the black wax on my tool chest-- more to come on that here very shortly