this post was submitted on 08 Oct 2024
14 points (100.0% liked)
Satisfactory
1562 readers
37 users here now
The unofficial Lemmy community for Satisfactory, the factory-building and exploration game.
Useful Links:
Looking for Group?
@[email protected] started a dedicated server and welcomes Fediverse users, find out more by DMing them or joining this steam chat
Rules
- No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia.
- Be respectful, especially when disagreeing. Everyone should feel welcome here.
- No NSFW content
- No ads/spamming
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
you need to place a pump just before you run out of head lift (normal buildings have ~4m I think)
you can see the head lift of the pump itself with the build menu hologram
Hmm i never noticed a visual indicator for the head lift. I can see the blue hologram and some sort of "waves" starting from the pump hologram. Assume, I have build a industrial tank on the bottom, 0 meter's above the ground. From there the pipeline starts straight upwards, for example 20 meter's. Where should I place the first mk II pump? At 3 meter's or later?
You can only see the blue headlift indicator when placing a pump after another pump. There isn't a baseline headlift indicator unfortunately.
Buildings supposedly have a 12m headlift as opposed to their advertised 10m headlift so have a little forgiveness.
Best indicator is to place and power your pump. If it's not actively pumping, then it's too high.
Also, pump mk ll is 50m, mk l is 20m :)
Unless you're power starved, just place your first pump near the output, don't waste time trying to save a few meters. After that, the next pump will snap to place where the last pumps headlift runs out. I read somewhere that the indicator won't show if it's more than 100m away horizontally, didn't have to test that situation myself though.
I can confirm it won't indicate the end around 100m away on the horizontal axis; I recently placed a second mk2 pipeline from the area with all the mushroom trees(I've yet to learn the names of each biome) to my grasslands base after the 1.0 update, and could not find the indicator or get it to snap-to on any one spot on the pipeline from far away.
My solution was to look for the last full length of pipe and put the pump there, repeating the process until that stopped happening or I had an opportunity to add vertical piping. It seems to be working.