this post was submitted on 31 Jul 2023
25 points (100.0% liked)

Bicycling

2208 readers
1 users here now

A community for those who enjoy bicycling for any reason— utility, recreation, sport, or whatever!

Post your questions, experiences, knowledge, pictures, news, links, and (civil) rants.

Rules (to be added on an as-needed basis)

  1. Comments and posts should be respectful and productive.
  2. No ads or commercial spam, including linking to your own monetized content.
  3. Linked content should be as unburdened by ads and trackers as possible.

Welcome!

founded 1 year ago
MODERATORS
[email protected]
25
Hit a bump on my road bike, now it's creaking pretty badly. Video included. (lemmy.world)
submitted 1 year ago by [email protected] to c/[email protected]
5 comments fedilink hide all child comments
 

2023 Felt VR 60.

I hit a bump while riding and now the front of my bike creaks. If I apply pressure on my handlebars, I can even hear it without riding. It sounds like the noise is coming from between the handlebars, so I'm thinking maybe it's the headset? But I'm not sure.

Here's a video of the sound: https://youtube.com/watch?v=7mbQVzI_Jj4?feature=share

you are viewing a single comment's thread
view the rest of the comments
[–] [email protected] 2 points 1 year ago (2 children)

I tightened my top cap and the creaking is gone!

I had my stem replaced at my local bike shop and I guess the top cap was just not tight enough, and the bump loosened it enough to creak?

[–] [email protected] 5 points 1 year ago (1 children)

If that's the case I would suggest loosening your top cap, then loosening your stem bolts, then tighten your top cap and then finally tighten your stem bolts. The top cap should only be taking up slack to tighten everything in the headtube. If it was loose and creaking then your stem was probably loose and/or slightly too high.

[–] [email protected] 5 points 1 year ago

Yeah, that's the process I did, just cut out the parts about the stem bolts :)

[–] [email protected] 3 points 1 year ago

If you were able to tighten the headset via topcat without loosening the stem first, the stem may be insufficiently tightened. Be sure to check that as a loose stem can cause the bars to turn without the wheel following suit.

Steps for tightening the headset would be:

  1. Loosen bolts on stem(usually two)
  2. tighten top cap until sufficient tension
  3. center bars over rim
  4. tighten bolts on stem