this post was submitted on 23 Jul 2024
233 points (98.7% liked)
Technology
59366 readers
3589 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related content.
- Be excellent to each another!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, to ask if your bot can be added please contact us.
- Check for duplicates before posting, duplicates may be removed
Approved Bots
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
The lesson is always use Ethernet whenever you can, folks.
And if you can't run Ethernet, even those power line Ethernet adapters are better then WiFi.
Just beware, if you’re in a place where you can only get DSL and coax or fiber are not available - Powerline does use the same frequencies as DSL and both the power cables and your landline are unshielded wires. So there will be cross talk and powerline can and probably will affect your DSL connection. Also depending on your cables and the powerline adapters you use, you may disturb radio stations in a wider area around your house.
Isn’t that illegal, as you’re basically radio jamming? Devices have that little FCC sticker saying it shouldn’t interfere with other devices. During my amateur radio license studying that was mentioned.
I’m curious about the privacy aspect; would someone be able to see my network by plugging in to the neighbors house, perhaps with some exploits involved?
Well, VDSL and VDSL2 use 138kHz to 12MHz and then 30-35.5MHz (according to the german Wikipedia - I couldn't find that table in the English article.)
Powerline has several standards (same as above, couldn't find that table in the English Wikipedia), but the frequency range starts at 2-4MHz and ends at 20-30MHz (with one standard using 30-68MHz).
For DSL, there's not really a problem using these frequencies but powerline transmits at a higher power and intentionally uses cross talk as a feature. The byproduct is that now your power cables act as an antenna and the Powerline signal "leaks".
~~Medium Frequency radio stations e.g. use the band from about 520kHz to 1.6MHz which correlates with Powerline and can be affected by it.~~ Edit: Medium Frequency transmissions in general (300kHz - 3MHz) and High Frequency transmissions (3MHz - 30MHz) can be affected, but radio stations shouldn't (~530kHz - 1.6MHz).
And yes, if you're transmitting "strong enough" over Powerline (depending on your adapter and how well your cables act as an antenna) one could recieve your signal and decode it. IIRC the signal is encrypted (somewhat like WiFi - the adapters need to be paired to talk to each other), but I don't know much details about it.
Depends on what they’re doing.