Homebrewing - Beer, Mead, Wine, Cider

2204 readers

2 users here now

A community dedicated to homebrewing beer, mead, wine, cider and everything in between. If it ferments, bring it over here.

Share recipes, ideas, ask for feedback or just advice.

Some starting points for beginners:

Introduction to Beer Brewing

A basic mead primer

Quick and diry guide to fermenting fruit - cider and wine

Brewing software

founded 1 year ago

MODERATORS

[email protected]

Secondary Lager Fermentation Slow? (feddit.de)

submitted 6 months ago by [email protected] to c/[email protected]

18 comments fedilink hide all child comments

In the past, I only ever did top fermenting styles. I had to depressurise my bottles sometimes even more than once (using swing top bottles, luckily, this is not too awful). Now I made a Vienna Lager and even though I can‘t even really cold crash the bottles (I have them sit outside at maybe 10°C instead due to a lack in fridge space), my secondary fermentation is way slower than I’m used to. Is that to be expected?

With ales, I opened the bottles the day after starting secondary, and it sometimes was a deafening bang already. Now, I waited maybe even two days and haven‘t got more than a shy little pop.

I used powdered sugar (mixed with sterile water 1:1) to feed the yeast in secondary fermentation because I didn‘t have anything else in the house when I found the time to bottle. Is that maybe an issue?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 3 points 6 months ago (1 children)

I'm not convinced the particular yeast strains make that much of a difference here. How did you measure your gravity though, what tool did you use & did you correct for alcohol? 4.5° is somewhere between my corrected and uncorrected readings. For the last three days, I read 5,9°Bx / 1.024 g with a refractometer, which Brewfather converted to 2.3° Bx / 1.009 final gravity when taking the fermentation into account. Your way, I'd have had to start secondary fermentation way earlier to leave some sugar behind. Doesn't sound like a bad idea though, saves just another bit of work and only needs me to get the timing right (and have reliable measurements of course).

[–] [email protected] 3 points 6 months ago (1 children)

I use hydrometer it gives you real gravity but you need more beer.

But when you calculate real gravity from refractometer you can use it.

The window for this method is from 4-4.5°Bx and I only used hydrometer so it may need little bit of trying to not get bombs.

Now I work in brewery and we use basically the same method, but because the tank caps work as regulated pressure relief valves, they are cooled... It is just more regulated and done before packaging (bottling and kegging).

[–] [email protected] 3 points 6 months ago (1 children)

Doesn't alcohol lower the density of the liquid, so that a hydrometer reading should have to be corrected as well to some degree? You sure now better than I do, but that was my impression.

Other than that, do you have a source for the numbers you mentioned? Something were I can go look stuff up myself, e.g. when I'm about to brew something very different?

[–] [email protected] 3 points 6 months ago

Tldr of this measurement is that density is affected only negligibly (with low concentration of alcohol). Refractive index changes a lot.

These numbers were "discovered" by trying, maybe from some 15 yo Czech seminar my dad attended when he started. I just know that it works.

For sugar I am adding the least amount possible- it has some already ~3.5 °Bx and I don't want bombs.