HobbesHK

I have been looking for a 2D reflective water shader for some time and was delighted to see that this tutorial was posted on YouTube to create just that:

https://www.youtube.com/watch?v=wPr5PvSgxFo

I've had a go at implementing it and have got the reflective water rendering. It's very "Kingdom: Two Crowns" like when spread across the full width of the scene.

However, as you can see from the image above, I've drawn a pond (as a separate Sprite2D) and I've applied the water shader to the pond. It's done that, but draws the water as a rectangle.

Is there a way to apply this shader to the Sprite2D, but conform to the actual sprite (only the light blue), rather than as a rectangle?

I was wondering if anyone could offer some insights.

Bit the bullet and purchased Alan Wake 2 on the Epic Game Store. With the DLC on the way I just can't wait any longer and maybe this one will never come to Steam? (With Epic as publishers, who knows)

I've installed Heroic Game Launcher, downloaded the latest Wine-GE and Proton-GE, downloaded the game and managed to get it running. Tried it with both Wine-GE and Proton-GE. No noticeable difference.

My specs:

• Intel Core i7 10700K
• 48Gb RAM
• Radeon RX 7800 XT 16Gb
• Manjaro Linux, kernel 6.9
• Mesa 24.1.1 (using the mesa-nonfree repo)
• Game is installed on my 1TB NVME drive

I'm running things on Medium/High, with FSR2 on Balanced, in 2560x1440

No raytracing enabled anywhere.

Honestly, it doesn't matter what resolution I choose. Even when running is 720p on Low, the framerate is the same.

I get around 27 fps with regular dips into the lower 15-20 when I spin the camera around quickly.

I've finished the first chapter (just in the morgue) and the framerate got choppier and choppier. I get Bright Falls has a lot more going on than the intro woodsy bit. But at this rate, I'm just not sure what to do.

When I look at other people on YouTube, their framerates are much higher. Even on Linux. And with less powerful hardware. Other games run MUCH faster. I get AW2 is demanding, but I can play CP2077: Phantom Liberty at 140+ fps in Dog Town on High in 1440p with FSR2 enabled, so I don't feel that AW2 should tank my PC that hard.

Is there something I'm overlooking here? I've tried the CyberFSR as well, made no noticeable difference.

Mangohud shows my CPU is consistently around 50% and my GPU is around 40% so there's definitely room to push things more, I feel. So why isn't AW2 using these resources?

Any help would be greatly appreciated. I love this game and want to play it, but the framerate is stopping me from really enjoying it.

I am absolutely stumped and hoping someone can help me. I'm on Gnome 46, kernel 6.8, Mesa 24

When running in Wayland, dark mode works without any issue. But unfortunately, xwayland is throwing up some issues with resized game windows and mouse captures only working in the upper left quadrant of the screen. So I switched over to "Gnome on Xorg".

Dark mode works for apps like Firefox, but none of my GTK4 apps change from light-to-dark.

I've reset my dconf using dconf reset -f /org/gnome/ and I've deleted gtk-4.0, gtk-3.0 folders from .config, I've tried to delete every file or folder in .config .local that may interfere with this, but no luck.

Over on Reddit, someone recommended installing gnome-themes-extra which has been installed on my system for a long while. Reinstalled, but made no difference.

I created a separate user and logged in. Everything works without a problem (X11 or Wayland). So there's definitely something in my current user folder not working.

The bizarre thing is that once I log back into my main user, after logging in as the other temp user, things work and I can switch between light and dark mode without a problem.

If anyone could help, I would be so, so very grateful! I'm reaching the point where I think I should just nuke my user folder and start from scratch, but since I don't know where the issue is lurking, I don't want to lose all my settings either, nor copy them over...

Hi all,

I recently got a new graphics card and am now enjoying a Radeon 7800XT after upgrading from my 5700XT.

I'm keen to move to the latest Mesa, but Manjaro Unstable (which I thought mirrored Arch very closely) is refusing to budge from Mesa 23.1.9

The reason being that 23.2 hasn't yet had a point-release.

I've tried mesa-git, found it to be quite buggy (not unexpected, it's 24.0-dev) so I went back to 23.1.9

Does anyone know of any way to get 23.2 or 23.3 going, since they've been officially released, but Manjaro rather arbitrarily decides this particular package update won't be included in the unstable branch?

(There are plenty of other packages in Unstable that don't have a point release either, so I would like some choice here, rather than stay on drivers that don't carry the full RTX improvements of later Mesa, which suddenly, on my new graphics card, I care about!)

Hi everyone, I was hoping someone could help me with the following. I have a button that saves a screenshot PNG to the Downloads folder when you press it.

What I want is for the button to disappear after it is pressed, so the screenshot does not include the two menu buttons called "%SaveReport" and "%BackMainMenu".

The code for the save button is listed below:

`

func _on_SaveReport_pressed():

$"%SaveReport".visible = false

$"%BackMainMenu".visible = false

print("I've disabled the buttons")
print("That means the screenshot SHOULD be button free")

take_screenshot()

$"%SaveReport".visible = true
$"%BackMainMenu".visible = true

`

As you can see, it calls the take_screenshot() function which is listed above:

`

func take_screenshot(): image = get_viewport().get_texture().get_image()

if OS.get_name() == "Web" or OS.has_feature('JavaScript'):
	print("We're on the web")
	# We're on the web		

	image.clear_mipmaps()

	var buffer = image.save_png_to_buffer()
	JavaScriptBridge.download_buffer(buffer, fileName)

if OS.get_name() != "Web" or !OS.has_feature('JavaScript'):
	# We're not on the web
	print("We're not on the web")
	
	var docs = OS.get_environment("HOME") + "/Documents"
	
	var title = str(docs + "/results",global_ints.observed_person_name, global_ints.observation_minutes,".png")
	
	print(title)
	
	var _saveimage = image.save_png(title)
	
	if OS.get_name() != "OSX":
		print("We're not on MacOS")
		var _openfolder = OS.shell_open(docs)
	
	if OS.get_name() == "OSX":
		print("We're on MacOS")
		
		var _openfolder = OS.shell_open("file://" + docs)

`

The code works. The screenshot is taken and it's saved to the Downloads folder and MacOS/Windows/Linux open up the Downloads folder straight after.

For the life of me, I can't figure out why the Back & Screenshot buttons ( "%SaveReport" and "%BackMainMenu") that I turn invisible BEFORE I call take_screenshot() end up being in the screenshot. Every single time.

Anyone have any ideas?

Thank you!

Hi everyone,

Pretty much as I described in my toot (text copied here). Is anyone aware of what I may need to fix to get this plugin to work again?

I'm hoping someone can help me with a Godot engine question. With the Q&A forum being read-only, I'm hoping Lemmy people can answer this one for me.

I'm trying to use this plugin for HTML5 downloads in Godot 4.1:

https://github.com/Pukkah/HTML5-File-Exchange-for-Godot

It's for Godot 3.4, but I've upgraded my projects and want to stay in 4.1.

Currently, it throws an error “Identifier JavaScript not defined in scope” (see screenshot).

Would anyone have an idea on what to fix here? Thanks!

Where is Chief Kyle?

I'm aware it could just be an actor-is-unavailable thing, but anyone know what happened?

Curious to see how his character could have been developed, particularly after the whole "Not Chief Kyle, he's so mean!" comment from season one as well as the impact of the crewman sacrificing himself to save Kyle's life.