64
Do I need to remove this excess thermal paste that squished out? Or can I leave it? (programming.dev)
submitted 2 years ago by to c/buildapc@lemmy.world
15 comments fedilink hide all child comments
 

Sorry for the horrible picture. It's hard enough to see with my eyes, let alone get a pic.

you are viewing a single comment's thread
view the rest of the comments
[–] 24 points 2 years ago* (last edited 2 years ago) (1 child)

Leaving it is fine as that amount of excess thermal paste won't have any detrimental effects.

If it bothers you enough however there are 2 ways you can remove it:

  • q-tip with 99% isopropyl alcohol
  • q-tip with electrical contact cleaner

For your case I'd recommend the first as it's cheaper

Again however with that small amount you'll be fine leaving it👍

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
  • [–] 11 points 2 years ago (1 child)

    Totally agreed. Most thermal paste is non-conductive, so it's not really an issue if it goes too far. However, if you ever use liquid metal, you have to be more careful

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 3 points 2 years ago

    The brand I am using is yeesterpaste. It was at microcenter. It has a little practice pad which was helpful. Turns out my gut feeling was not quite enough. But I may have been a little over zealous with the real one lol.

  • permalink
  • fedilink
  • source
  • parent