151
13
submitted 11 months ago by [email protected] to c/[email protected]
152
99
submitted 11 months ago by [email protected] to c/[email protected]
153
9
submitted 11 months ago by [email protected] to c/[email protected]

Once I read that it could be good to have 2 helmets.

  • One to deal with freezing/cold temperatures
  • One to deal with hot/warm temperatures

I guess that both types can be used for cooler temperatures.

What is you opinion about that ?

Do you have some suggestions of helmets, some models you like, or even different advices to share with us ?

154
9
submitted 11 months ago by [email protected] to c/[email protected]

Ok, so here's my problem.

I own quite a few padded shorts, ranging from $30 - $250 (bibs), and they feel great for the first 2-3 hours, then I get really uncomfortable in them. Not pain, but quite uncomfortable.

I was able to ride 200km wearing only compression shorts with no padding, but I think I got lucky.

Regular shorts/underwear always have issues because of the seams, so they aren't viable.

I heard that triathlon shorts are lightly padded, so they may offer a nice in-between.

Does anyone wear them? How do they compare to traditional cycling shorts?

155
44
submitted 11 months ago by [email protected] to c/[email protected]

Yesterday i finally whip up the courage to try commuting with bike, i planned the 40km round trip to visit my mom and go grocery shopping on the way back,, planned the route with as much residential street as possible, and that was a fun experience! While there's a lot of "woah, ebike"(where i live a proper ebike is rare, even though mine is converted) and "you travel from that small town? That's insane!" from stranger, what's not fun is the ride on some stretch of the road.

I live in a small town outside the city, a lot of the road going out of the town is pretty much 1 lane each way, no cycling facility for the whole country(Malaysia), the road shoulder is narrow to non-existent(the line is basically bordering between road and grass/dirt) if not filled with potholes/cracks/sketchy road maintenance/bump made by tree root, and motorist often driving very fast even on narrow road. Luckily more often than not they does give me a lot of space when they're passing(thanks to motorcycle culture), but those who don't is very discouraging for the whole experience, mostly it's the one riding moped that pass me too close for comfort with 30/50kmph faster than me(no thanks to motorcycle culture).

I planned to do it often, first by doing a no-car sunday, then slowly switch to commuting to work(also 40km round trip), and eventually cut down car use to only just a day or two a week or only on long distance travel, but this experience kinda made me second guess the whole plan. It's also quite tiring, i can still feel the fatigue today.

So how did you guys that do the commute able to keep going? Any advice on that end?

156
44
submitted 11 months ago by [email protected] to c/[email protected]

also works on downtube

157
25
Weird Infra Quiz (lemmy.world)
submitted 11 months ago* (last edited 11 months ago) by [email protected] to c/[email protected]

This is a photo from two years ago, i stood there for a good minute wondering how the hell and why this weird cycle path was there. It is in southern France, on the climb to Col d'Ecre, bit north of Nice.

Take a guess, i finally fully understand.

158
33
Follow up on the tire (sh.itjust.works)
submitted 11 months ago by [email protected] to c/[email protected]

Follow up as I got the tire off the rim after work. Definitely seems like it's starting to split. But only on one side. Is this indicative of being pinched by the rim? Ridden on asphalt trail 95% of the time.

159
66
submitted 11 months ago by [email protected] to c/[email protected]

I couldn't find almost any tutorials on how to disassemble or service this particular eBike motor (Bafang M400), so I just started removing screws and pulling out parts while taking a ton of pictures.

I found two dirty, rusty bearings that I cleaned and re-greased, along with all the gears, and then put it back together. Not only did I manage to avoid breaking it, but the noise seems to be gone as well. This was by far the most intimidating bike repair I've done so far. I've serviced every other part before, but I hadn't dared to touch the motor until now.

It also turns out that the motor is much better sealed than I expected, so I'll happily continue doing deep river crossings with the motor half submerged in the future, just as I have done until now.

160
45
Strange tire wear at rim (sh.itjust.works)
submitted 11 months ago* (last edited 11 months ago) by [email protected] to c/[email protected]

Was going to go for a simple ride tonight. Noticed this strange wear on my tire right next to the rim. Is this bad/a big deal?

Update: thank you all for your quick replies! I will be not be riding it and change it out. My rim is definitely very slightly bent, I can feel it when I ride. Definitely need a new bike since I know I'm too heavy for this bike.

161
45
submitted 11 months ago by [email protected] to c/[email protected]

When we were kids, you may have had a honky-horn with a bulb on the end, perhaps you had bells with gears that strike multiple times as they unwind like one of those self-propelled matchbox cars. Maybe you unscrew your bell halfway so the cracks on the trail ring it as you weave through a crowd of other trail users. Or maybe you ride a folding bike through the airport with a little electric horn. Perhaps you're the best kind of DIY redneck and have fitted a literal tugboat horn to a bike trailor so you can scare the bejeezus out of a coalroller after they dump a load of black smoke on you.

Whatever it is, I want to know about it and why you chose it.

162
43
submitted 11 months ago by [email protected] to c/[email protected]
163
19
submitted 11 months ago by [email protected] to c/[email protected]
164
10
submitted 11 months ago by [email protected] to c/[email protected]
165
-5
submitted 1 year ago by [email protected] to c/[email protected]
166
2
submitted 1 year ago by [email protected] to c/[email protected]
167
4
submitted 1 year ago by [email protected] to c/[email protected]
168
34
submitted 1 year ago by [email protected] to c/[email protected]

When i went onto my first solo cycle trip some years ago (from germany to marseille, france), my coworkers joked that i should ride mont ventoux. I had no idea what mont ventoux was, but read it up. On that trip i happened to cycle around this mythical mountain, looked awesome, but i never seriously considered going up ever.

On two more cycle trips i cycled around mont ventoux on different routes, and it always looked just so cool from afar. This trip i wanted to hit mont ventoux, but i got sick basically on the western foot of it. I rode in recovery mode east past it, through the valley, looked awesome again. I then continued towards the high alps but eventually decided to turn around because of the weather forecast, back south into the prealps of provence.

And today i actually got to ride it. I rode it from Sault, because that's where i was coming from, which i guess is not what the OG's do or consider "riding mont ventoux", but cycle tourers are aloud to do that, haha.

Lots of roadies going up there. And it lived up to its name, it was real windy. In the morning at the bottom of the climb one roadie told me that it might be too dangerous to ride to the summit today but thankfully the wind chilled out a bit as i was going up, and also the cloud that had covered the top went away.

Picture is bit below the top on the descend to Malaucene. That glider plane was going nuts, that stuff looks absolutely crazy.

169
28
submitted 1 year ago by [email protected] to c/[email protected]

The one where it says "terre de cyclistes". Pretty cool slogan, metropole nice cote d'azur.

170
10
submitted 1 year ago by [email protected] to c/[email protected]
171
-6
submitted 1 year ago by [email protected] to c/[email protected]

I don't even know what to say to this. Some of these are great and then there's ones that haven't made it to even prototyping.

172
56
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]

Alternative Youtube Link

Written Article about the bike, for those who are bandwidth limited.

173
135
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]

I lost four spokes on my morning commute when the chain decided to jump off the big cog. Of course I don't have a spoke protector. (Who needs a dork disc? Bad things won't happen if you keep your bike maintained. /s) I was lucky to skid to a stop rather than crash when the rear wheel locked up.

PSA: keep a few zip ties in your repair kit.

174
27
submitted 1 year ago by [email protected] to c/[email protected]

Long story short: completely stripper the hex slot on the back of the freehub body while trying to remove it. It’s incredibly tight. Can I just take a pipe wrench to it from the front or do the teeth seen here on the new part lock with the wheel hub making it impossible to turn?

175
19
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]

Edit: The way I had it in the photos is correct. Thanks for helping me out, those who chimed in!

Original question:

I replaced the straight handlebars with risers on my mountain bike, and because of the slightly longer distances involved, I have to replace the brake and gear cables with slightly longer ones.

Unfortunately, I did not take a picture of the cable clamp for the front derailleur before I undid it. Now I'm clueless as to how to route the replacement cable - basically the same problem as this poster on RetroBike, except their derailleur is different from mine.

I have super old parts, so I've had a hard time finding documentation online. The best documentation I've found is the following:

In the service instructions, third column, "SIS adjustment" section, three-quarters of the way down, it says:

  • Cut off any unnecessary cable, attach an end cup, and hook it onto the pin.
  • Note: Pass the cable through as shown in the illustration.

What is absolutely throwing me for a loop is the illustration seems to show the cable running from the bottom upward, but... how? Can anyone help me figure out what I'm missing? I feel like a dumb dumb.

view more: ‹ prev next ›

Bicycles

4197 readers
10 users here now

Welcome to [email protected]

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 2 years ago
MODERATORS