Since rpis have been almost impossible to find, I've been looking around for alternatives for some local self hosted services like home assistant. A lot of boards seem to talk about GPU, GPIO pins, etc. But I really just want a single board, fanless (low power), decent CPU and RAM, ethernet.

Any recommendations?

you are viewing a single comment's thread
view the rest of the comments
[–] 3 points 3 years ago (1 child)

I gave up on using raspberry pi for running servers.

I ended up buying a $60 lenovo on ebay https://www.servethehome.com/lenovo-thinkcentre-m710q-tiny-guide-and-ce-review/2/ and then loaded it up with 32GB of ram. Now I run a proxmox hypervisor and around 20+ containers/VMs. Best decision I ever made. I just spin up servers willy nilly

If you don't need GPIO then run a hypervisor. Cheaper than SBCs and more useful.

  • source
  • hideshow 2 child comments
  • [–] 2 points 3 years ago (2 children)

    I use a pi for servers because of the assumption that it uses very little power to run (compared to say, an old unused laptop), is that not the case?

  • source
  • parent
  • hideshow 4 child comments
  • [–] 1 point 3 years ago

    Pis consume lower power, but are less powerful also. I think thr Power Consumption VS Performance is way better on Tiny/Mini/Micros. The Pi4 may idle at 3-4W where a 8th gen USSF will idle at 6-8W, but will provide more than 2x the performance IMO.

    I prefer paying almost the same price for a USSF with an i5-8500T than a Pi, even if it consume more, idle under 10W is great, and they let you go up to 65W if needed!

  • source
  • parent