26
If you want to host something on a Raspberry Pi, you should consider using literally any other piece of hardware (toad.work)
submitted 3 years ago* (last edited 3 years ago) by to c/selfhosted@lemmy.world
185 comments fedilink hide all child comments
 

There are a lot of reasons not to give them your money. They're assholes to the maker community and they openly talk shit on a lot of their customer base. That's beside the point, though, really.

It's just not a spectacular option for hosting. In order to get a Rpi competitive with even the shittiest laptop from 7 years ago, you're going to end up spending more than you would spend on a decent laptop from 7 years ago.

If it is a computer that turns on, it will likely function orders of magnitude better than an Rpi and won't bind you to ARM architecture. My entire hosting setup was pulled out of a recycling pile for free. Install ubuntu/ubuntu server and enjoy yourself.

If you intend on spending any amount of money on this hobby, I cannot express enough how much I recommend against any of that money going toward a Raspberry Pi.

EDIT: A lot of you seem to be reading this as "Raspberry Pis are all nonfunctional" and getting mad about it. Don't do that.

Edit 2: Good to see that all the stupid parts of reddit made it here

you are viewing a single comment's thread
view the rest of the comments
[–] 41 points 3 years ago (8 children)

It will not be that great like on Raspberry Pi, but Mini PC are also very low on energy. For example,. Wyse 5070 with J5005 idles around 3-5 W, which is really great. i had HP 800 Mini G3 that idled ~7-8W. Mini PCs are more powerful, expandable and can use normal SSD Drive. For selfhosting they are better, but in some places Raspberry Pi (or alternative like Orange Pi) will be better, especially when you need something small and really low power

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 8 child comments
    •
  • [–] 13 points 3 years ago* (7 children)

    I never heard of the orange pi!

    Some of the models are very cheap. Have you tried them? If they are as reliable, I might get myself one for a couple of projects.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 7 child comments
    •
  • [–] 14 points 3 years ago

    Yes. I have Orange Pi Zero 2 with 1 GB of RAM running Ubuntu. This is actually very powerful machine, more powerful than my Raspberry Pi 3B+. i bought it for about 180 polish zloty (around 40 euros). I use it for printing server with Ghostscript printer app installed via Snap. I also tried Wireguard and MongoDB - everything works fine. it works really well, but it sits around 50 C on CPU, so it can get hot.

  • permalink
  • fedilink
  • source
  • parent
  • [–] 6 points 3 years ago (4 children)

    I tried one ~5-10 years ago and the idea was good but it didn't have nearly the level of support that Raspis have.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 3 points 3 years ago (2 children)

    Do you mean hardware-wise, or software?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 5 points 3 years ago (1 child)

    A little bit of both IIRC.

    It used a different chipset than the raspberry so it needed a tweaked version of Raspbian to run but the drivers weren't great and the repos were missing a lot of stuff/outdated.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 2 points 3 years ago* (last edited 3 years ago)

    I got an 1 gig Orange pi zero 2 with a 2 port USB expansion board. I got it from ali express with a 32gigabyte micro SD card, USB to USBC charging cable for like $40.

    I 3d printed a case for it. Provisioned it with a heatsink, fan, 18W USB power supply, and a UPS.

    I use it as an octoprint server, the extra USB ports go to a webcam and a fan if i feel like it. It's been reliable but I've only had it a month. Transferring jobs is nearly instant plugged into gigabit ethernet. Transfer is via API key not web interface. Seems to do alright in the CPU department. It has to parse some of the larger jobs for a minute.

    Prints perfectly. Only had one resent packet USB packet so far. After it prints rendering out 1080P time-lapses was slow. It would hit like 70% cpu usage and take hours. Rendering out 1080P octolapses with fewer frames and less movement would hit 98% cpu use but be done very fast - like 10 min.

    They just announced an orange pi zero 3 with a similar form factor (but not exactly the same) and larger faster memory.

  • permalink
  • fedilink
  • source
  • parent