β² 553 βΌ just robot stuff (thelemmy.club) submitted 1 week ago by sharkfucker420@sh.itjust.works to c/comicstrips@lemmy.world 40 comments fedilink hide all child comments
[β] sns@lemmy.dbzer0.com 25 points 1 week ago (1 child) The WD-40 is a nice touch. permalink fedilink source hideshow 2 child comments replies: [β] Damage@feddit.it 15 points 1 week ago (4 children) Wd-40 Is not a lubricant!! permalink fedilink source parent hideshow 8 child comments replies: [β] Thorry@feddit.org 11 points 1 week ago He will be using it to clean his workspace permalink fedilink source parent [β] Eternal192@anarchist.nexus 4 points 1 week ago It's the white lithium one. permalink fedilink source parent [β] OhStopYellingAtMe@lemmy.world 4 points 1 week ago Anything is a lubricant if itβs hot enough. permalink fedilink source parent [β] UnfairUtan@lemmy.world 1 point 1 week ago (1 child) ELI5 : why does it feel like it lubricates my garage door and other metalic-y things that rub together? permalink fedilink source parent hideshow 2 child comments replies: [β] Damage@feddit.it 5 points 1 week ago (1 child) So unfortunately WD-40 as a product has become actually several different products with different properties, so it's possible that yours is actually a lubricant. But if you have to reapply it often then no, it's normal WD-40. What it does is it unblocks and cleans the gaps between moving parts, and it does have a slight lubricant effect but that doesn't last long, so after a while you have moving parts, where WD-40 has removed any remnant of lubricant, rubbing against each other directly. permalink fedilink source parent hideshow 2 child comments replies: [β] UnfairUtan@lemmy.world 1 point 1 week ago (2 children) I see. The one I usually use doesn't explicitly say it lubricates but that it can "loosen" metals and clean them. permalink fedilink source parent hideshow 4 child comments replies: [β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent [β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
[β] Damage@feddit.it 15 points 1 week ago (4 children) Wd-40 Is not a lubricant!! permalink fedilink source parent hideshow 8 child comments replies: [β] Thorry@feddit.org 11 points 1 week ago He will be using it to clean his workspace permalink fedilink source parent [β] Eternal192@anarchist.nexus 4 points 1 week ago It's the white lithium one. permalink fedilink source parent [β] OhStopYellingAtMe@lemmy.world 4 points 1 week ago Anything is a lubricant if itβs hot enough. permalink fedilink source parent [β] UnfairUtan@lemmy.world 1 point 1 week ago (1 child) ELI5 : why does it feel like it lubricates my garage door and other metalic-y things that rub together? permalink fedilink source parent hideshow 2 child comments replies: [β] Damage@feddit.it 5 points 1 week ago (1 child) So unfortunately WD-40 as a product has become actually several different products with different properties, so it's possible that yours is actually a lubricant. But if you have to reapply it often then no, it's normal WD-40. What it does is it unblocks and cleans the gaps between moving parts, and it does have a slight lubricant effect but that doesn't last long, so after a while you have moving parts, where WD-40 has removed any remnant of lubricant, rubbing against each other directly. permalink fedilink source parent hideshow 2 child comments replies: [β] UnfairUtan@lemmy.world 1 point 1 week ago (2 children) I see. The one I usually use doesn't explicitly say it lubricates but that it can "loosen" metals and clean them. permalink fedilink source parent hideshow 4 child comments replies: [β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent [β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
[β] Thorry@feddit.org 11 points 1 week ago He will be using it to clean his workspace permalink fedilink source parent
[β] Eternal192@anarchist.nexus 4 points 1 week ago It's the white lithium one. permalink fedilink source parent
[β] OhStopYellingAtMe@lemmy.world 4 points 1 week ago Anything is a lubricant if itβs hot enough. permalink fedilink source parent
[β] UnfairUtan@lemmy.world 1 point 1 week ago (1 child) ELI5 : why does it feel like it lubricates my garage door and other metalic-y things that rub together? permalink fedilink source parent hideshow 2 child comments replies: [β] Damage@feddit.it 5 points 1 week ago (1 child) So unfortunately WD-40 as a product has become actually several different products with different properties, so it's possible that yours is actually a lubricant. But if you have to reapply it often then no, it's normal WD-40. What it does is it unblocks and cleans the gaps between moving parts, and it does have a slight lubricant effect but that doesn't last long, so after a while you have moving parts, where WD-40 has removed any remnant of lubricant, rubbing against each other directly. permalink fedilink source parent hideshow 2 child comments replies: [β] UnfairUtan@lemmy.world 1 point 1 week ago (2 children) I see. The one I usually use doesn't explicitly say it lubricates but that it can "loosen" metals and clean them. permalink fedilink source parent hideshow 4 child comments replies: [β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent [β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
[β] Damage@feddit.it 5 points 1 week ago (1 child) So unfortunately WD-40 as a product has become actually several different products with different properties, so it's possible that yours is actually a lubricant. But if you have to reapply it often then no, it's normal WD-40. What it does is it unblocks and cleans the gaps between moving parts, and it does have a slight lubricant effect but that doesn't last long, so after a while you have moving parts, where WD-40 has removed any remnant of lubricant, rubbing against each other directly. permalink fedilink source parent hideshow 2 child comments replies: [β] UnfairUtan@lemmy.world 1 point 1 week ago (2 children) I see. The one I usually use doesn't explicitly say it lubricates but that it can "loosen" metals and clean them. permalink fedilink source parent hideshow 4 child comments replies: [β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent [β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
[β] UnfairUtan@lemmy.world 1 point 1 week ago (2 children) I see. The one I usually use doesn't explicitly say it lubricates but that it can "loosen" metals and clean them. permalink fedilink source parent hideshow 4 child comments replies: [β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent [β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
[β] notabot@piefed.social 2 points 1 week ago If it's cleaning the metal parts, then it's actually removing the oil or grease that would lubricate the mechanism. WD-40 displaces and repels water, which can make it a good choice for coating metal you need to store, and it strips oils, which makes it useful for removing old, dirty, lubricants, but it doesn't really take their place. It can be good for loosening surfaces than have bound together, but that's its cleaning function, rather than lubrication. You'd be better off getting some proper lubricating grease for your garage door, but don't use too much, or it'll tend to trap dirt, and you'll need that WD-40 to clean it off before reapplying it! permalink fedilink source parent
[β] Damage@feddit.it 1 point 1 week ago Depending on what you are unblocking, grease or simple oil can be a longer term solution permalink fedilink source parent
