For whatever reason, the top piece warped despite what appear to be basically perfect supports.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![]()
Moderation policy: Light, mostly invisible
Not sure why it would warp there, perhaps infill percentage is too high?
If you don't need the layer lines to be in a specific orientation I'd consider rotating the model back 90° for the reprint, hopefully that should avoid any warping.
That does seem to be a good suggestion. I think I'll do that.
@Militias @mortalic Yep, that is what I would have done, better to avoid supports at all costs. (but layerlines as said)