400
Western Digital details 14-platter 3.5-inch HAMR HDD designs with 140 TB and beyond (www.tomshardware.com)
submitted 5 months ago by veeesix@lemmy.ca to c/selfhosted@lemmy.world
134 comments fedilink hide all child comments

cross-posted from: https://beehaw.org/post/24650125

Because nothing says "fun" quite like having to restore a RAID that just saw 140TB fail.

Western Digital this week outlined its near-term and mid-term plans to increase hard drive capacities to around 60TB and beyond with optimizations that significantly increase HDD performance for the AI and cloud era. In addition, the company outlined its longer-term vision for hard disk drives' evolution that includes a new laser technology for heat-assisted magnetic recording (HAMR), new platters with higher areal density, and HDD assemblies with up to 14 platters. As a result, WD will be able to offer drives beyond 140 TB in the 2030s.

Western Digital plans to volume produce its inaugural commercial hard drives featuring HAMR technology next year, with capacities rising from 40TB (CMR) or 44TB (SMR) in late 2026, with production ramping in 2027. These drives will use the company's proven 11-platter platform with high-density media as well as HAMR heads with edge-emitting lasers that heat iron-platinum alloy (FePt) on top of platters to its Curie temperature — the point at which its magnetic properties change — and reducing its magnetic coercivity before writing data.

you are viewing a single comment's thread
view the rest of the comments
[-] Andres4NY@social.ridetrans.it 8 points 4 months ago

@Fmstrat @veeesix Since there's two very diffrent questions there.. The first, "where do the failures happen?": anywhere. It could be the controller dying (in which case the platters themselves are fine if you replace the board, but otherwise the whole thing is toast). It could be the head breaking. It could be issues with a specific platter. It could be something that affects _all_ the platters (like dust getting inside the sealed area). So basically, it very much depends.

[-] Andres4NY@social.ridetrans.it 5 points 4 months ago* (last edited 4 months ago)

@Fmstrat @veeesix The second, could you do raid across specific platters - yes and no. The drive firmware specifically hides the details of the underlying platter layout. But if you targeted a specific model, you could probably hack something together that would do raid across the platters. But given the answer to the first question, why would you?

[-] Fmstrat@lemmy.world 2 points 4 months ago

Great answers, thank you.

this post was submitted on 07 Feb 2026
400 points (98.8% liked)

Selfhosted

60482 readers
1051 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

Detailed Rules Post

  1. Be civil.

  2. No spam.

  3. Posts are to be related to self-hosting.

  4. Don't duplicate the full text of your blog or readme if you're providing a link.

  5. Submission headline should match the article title.

  6. No trolling.

  7. Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details.

  8. AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 3 years ago
MODERATORS
ruud@lemmy.world
Loki@lemmy.world
CannaVet@lemmy.world
devve@lemmy.world
ayyy@sh.itjust.works
curbstickle@anarchist.nexus
curbstickle_lw@lemmy.world