189
Run Your PS2 Library from a $50 Memory Card Effortlessly (www.retronews.com)
submitted 2 years ago by to c/retrogaming@lemmy.world
36 comments fedilink hide all child comments
 

A new innovation in the retro gaming community now allows you to run your entire PS2 library directly from a $50 memory card, thanks to the Multi-Purpose Memory Card Emulation (MMCE) protocol.

you are viewing a single comment's thread
view the rest of the comments
[–] 5 points 2 years ago* (last edited 2 years ago) (4 children)

I have my ps2 games on my Nas and set up a share that Open Ps2 Loader could access, except the games that don't work like that which i have on an internal ssd, this sounds like a much easier solution I could have done instead of needing to get an oem network adapter, a hard drive, a sata adapter board, a d all the configuration and freemcboot... sounds like this would replace all that... if I wasn't already set up I would have gone this route.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 4 child comments
    •
  • [–] 3 points 2 years ago (3 children)

    Woah woah slow down, this sounds like more fun. What is your setup?

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 3 child comments
    •
  • [–] 0 points 2 years ago (2 children)

    what do you mean my setup? I have a fat PS2 with an OG network adapter that I removed the IDE board from and replaced with a SATA board and attached a SSD to it. Network cable runs from the network adapter to the wall, I have lots of magic behind the wall, and then it comes out at the NAS where I have a share where all the games are digitally backed up while the discs store dust in a box in my closet. Only game I currently run off the SSD since it won't work over the NAS is FF10-2, and really the only reason I even ripped it was because that's how I felt when the game came out...

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •