64
Do I need to remove this excess thermal paste that squished out? Or can I leave it? (programming.dev)
submitted 2 years ago by to c/buildapc@lemmy.world
15 comments fedilink hide all child comments
 

Sorry for the horrible picture. It's hard enough to see with my eyes, let alone get a pic.

you are viewing a single comment's thread
view the rest of the comments
[–] 11 points 2 years ago (1 child)

Looks good to me. Also, is that a Peerless Assassin?

  • permalink
  • fedilink
  • source
  • hideshow 2 child comments
    •
  • [–] [S] 5 points 2 years ago (1 child)

    Yes, it is! Good eye!

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 2 points 2 years ago (1 child)

    You'll like it! I had one but had fitment issues (SFF build). Now I have a Phantom Spirit (non-SE or EVO), which is basically the same thing but with seven heat pipes and only 154mm tall.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] [S] 3 points 2 years ago (1 child)

    The front fan on this doesn't quite clear the RAM, but it's so minor I think it's fine being a tad higher.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 3 points 2 years ago

    For sure. The center fan is doing the hard work, and Noctua and others have started shipping these same cooling blocks with a single 140mm fan in the middle.

    Here's how I have mine (pulling from the back, top exhaust).

    Photo of a white NR200 case with a Thermalright Phantom Spirit 120 and 3060ti GPU. The CPU cooler uses a 120mm fan in the middle and a 15mm fan at the back.

  • permalink
  • fedilink
  • source
  • parent