28
Advice on a Printer (lemm.ee)
submitted 3 years ago* (last edited 3 years ago) by to c/3dprinting@lemmy.world
37 comments fedilink hide all child comments
 

I am very interested in 3D printing and I want to get into it. What would be a good printer for a beginner that is also of reasonable quality.

I don't want to make anything huge but I don't want to limit myself to any size that's unreasonably small.

Edit: Wow, you guys were all so helpful. While I haven't made my decision I have a lot more to go off of, I'm gonna do a bit more research into it based on what you have all said.

you are viewing a single comment's thread
view the rest of the comments
[–] 4 points 3 years ago (1 child)

Don't buy Ender 3, it's not really good (it's probably the best in cost/value ratio, but not great in general).

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 2 child comments
    •
  • [–] 1 point 3 years ago

    Ender 3 isn't a great printer, but it's a great starting point to make a good printer with some work. It's not a great first printer with UNLESS you like the idea of buying a printer that needs work and plan on learning as you modify it. So, expect lots of print failures as you learn and modify the printer.

    This was how I learned printing. But I started FDM a decade ago with a SeeMeCNC Orion. Very crude compared to modern consumer printers.

    A buddy of mine bought an Anycubic Vyper on clearance and he's happy with it. It has solid bed mounts and a leveling probe, which resolves half of printer problems, and it has dual Z steppers, which I think helps a lot. I believe it comes with a steel PEI bed which is easier than glass to get good prints (and much easier than painters tape or kapton like my Monoprice mini).

  • permalink
  • fedilink
  • source
  • parent