157
Google has abandoned the Coral TPU (lemmy.world)
submitted 5 months ago by to c/selfhosted@lemmy.world
41 comments fedilink hide all child comments
 

The Coral TPU driver has basically been abandoned by Google so if you are running a Linux kernel newer than 6.2 it will not function.

https://github.com/google/gasket-driver is the original driver which was archived on April 18, 2026

You can try the driver https://github.com/feranick/gasket-driver or https://github.com/dude84/gasket-driver-coral or search through the forks of the original gasket-dkms driver https://github.com/google/gasket-driver/forks

So in the future your options are to pin your kernel to 6.2, upgrade your hardware, hope that someone will keep a gasket-dkms fork updated for newer kernel versions, or make your own fork to do so yourself.

you are viewing a single comment's thread
view the rest of the comments
[–] 8 points 5 months ago (1 child)

Nowadays just get an Intel Arc A380 for 150€ and you can use it for a lot more than only Frigate. That thing is a little beast for my server.

  • permalink
  • fedilink
  • source
  • parent
  • hideshow 1 child comment
    •
  • [–] 2 points 5 months ago

    Unfortunatly this is not possible for my setup. I have a Asrock J4050 with its soldered cpu. So I need something like a separate device. USB, SBC with lan, anything like that... Because of that, I was happy when i discovered coral. And to be honest: I did not researched deeply. So I am unaware of its limitation to frigate. I wanted to create my own model and run it on coral. The training was planned to be done on another device.

    Now I need to check if a raspi could be sufficent or if anything else comes up.

  • permalink
  • fedilink
  • source
  • parent