285
submitted 1 week ago by [email protected] to c/[email protected]

cross-posted from: https://lemmy.dbzer0.com/post/45765963

The design is based on the excellent Dactyl keyboard, generated with https://ryanis.cool/cosmos/ and it runs the excellent qmk firmware. It is handwired:

and I have also made a palm support using inkscape and openscad

All printed on a reprap prusa i3 derivative.

This helps me use my computer with less pain, so I want to call out all the wonderful projects and people who contribute to them which made it possible.

Total cost? $60 aud, amortised filament ~15 bucks worth maybe? and a lot of my time haha.

you are viewing a single comment's thread
view the rest of the comments
[-] [email protected] 4 points 1 week ago

Very cool!

Honest question, does using a keyboard like this make you forget how to use a standard one?

I know op did it for the pain, so it's a moot point. But if I did it just because it's cool, and to avoid injury in the future, would I mess up my normal keyboard abilities?

[-] [email protected] 7 points 1 week ago

I also switched to colemakdh with a series of layers and qmk tricks. My typing is quite slow so far, around 30 wpm, I was never an amazing typist but I haven't noticed difficulty with standard qwerty layouts.

It's not like you get confused between a harp and a guitar, or a spoon and a knife.

[-] [email protected] 2 points 1 week ago* (last edited 1 week ago)

for me, switching to dvorak about 10 years ago has made me absolutely useless at typing qwerty… i get used to it after 5min, but much slower than i used to be and wow is it paiiiiiin (both literally in my wrists - the reason i switched, and figuratively in that i feel like im fighting the keyboard for every word)

… or perhaps you mean the differences in physical layout

[-] [email protected] 1 points 1 week ago

I haven't noticed difficulty. Maybe because the layout is so different, maybe I will with time, or maybe I'm just ~~better than you~~ lucky :p

[-] [email protected] 1 points 1 week ago

I see you've played knifey spoony before

[-] [email protected] 5 points 1 week ago

As someone who runs an ergodox ez with a custom key layout and who goes in to work from time to time using normal QWERTY keyboards (both English and German configuration), you do not lose anything. It's incredibly easy to switch between every config you have.

I also think most people would appreciate a split keyboard setup because it's so much better for posture and health and comfortability. Would highly recommend.

[-] [email protected] 1 points 1 week ago

Oh now this is different than I've heard, some others have had issues switching back and forth. So maybe I will give it a try, once I've got qwerty up to a decent speed and I feel comfortable with it.

Right now it's a problem because if I'm in a hurry, I'm tempted to type the old way, or a broken mixture of the two that messes with what I've learned. Not good. Gotta slow down and do it right, bah..

Thanks for the recommendations, I'm gonna put a 3d printed split board on my list of things I'll definitely get to some day and totally won't get pushed off the back of the furthest back burner lol

[-] [email protected] 2 points 1 week ago

Lol. For context, it took me maybe two weeks to get back up to full speed on a new typing layout. When I moved to Germany they moved some keys around on standard qwerty and it took me a couple of days.

If you're already touch typing I think most changes are easy to adapt to and don't overwrite previous muscle memory. Your brain is powerful, believe it is and it will work.

[-] [email protected] 2 points 1 week ago

That's good to know, thanks! I'm still just learning to touch type. I spent a few decades typing fast enough but always looking at the keys. This year I've started learning touch typing, I'm only a half dozen hours in, so still pretty new.

But when I get good I'll take this into consideration! Thanks!

[-] [email protected] 3 points 1 week ago* (last edited 1 week ago)

I use Colemak on phone and Qwerty on desktop, and never think about it.

[-] [email protected] 1 points 1 week ago

Interesting 🤔 why? Just curious

[-] [email protected] 3 points 1 week ago

I tried other layouts because it's easy with an on-screen phone keyboard, just an oftion in the app menu, and Colemak felt the most intuitive to use. I didn't have to get used to it, it felt natural from the start.

It's not as easy to switch with a physical keyboard, with so many games having movement and other functions tied to specific keys that assume a qwerty layout, so I kept using what I was used to in that circumstance. I don't even think about it.

One of these days, I'll probably buy/set up a physical Colemak keyboard, and see how that is with games.

[-] bdonvr 1 points 1 day ago

I know I'm late but my keyboard has a physical switch I can use to change layouts.

I really can't type on QWERTY anymore but if I'm too lazy to change/remap the game to work with Colemak I'll just flip it to QWERTY to play.

Though if the game has chat you want to use you don't have much choice but to remap the controls.

[-] [email protected] 1 points 1 day ago* (last edited 1 day ago)

How does that work? Does it move all the keys around for you or is it, like, double-sided? Or it just changes the layout used by the system while you're in a game? That sounds useful as long as you aren't typing in chat.

[-] bdonvr 1 points 1 day ago

My keyboard has no letters on it, so the layout doesn't matter. I made myself learn to not look at it.

The switch changes what the keyboard is telling the computer I'm pressing. The computer itself is set to QWERTY.

this post was submitted on 03 Jun 2025
285 points (98.6% liked)

3DPrinting

18493 readers
296 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or [email protected]

There are CAD communities available at: [email protected] or [email protected]

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS