Right now it's just flicking on and off at an infuriating interval. I assume it's supposed to sense motion but there's no real motion happening. Maybe it's just broken but I'm hoping I just don't know how to use it and one of you does.

When I press the side buttons those green lights seem to go up or down. None of the other buttons appear to do anything.

Update: idk how it didn't occur to me to just cover it but that's night 3/3 12s for ya.

all 26 comments

sorted by: hot top controversial new old
[–] 27 points 1 day ago (1 child)

It's a motion sensing switch, the buttons on the left should adjust how long the light remains on after motion is last detected.

  • source
  • hideshow 1 child comment
  • [–] 16 points 1 day ago* (last edited 1 day ago) (1 child)

    It's a motion sensor switch for sure

    I believe the buttons on the side are a dimmer switch

    These usually have some way of adjusting the sensitivity and how long the timeout is, it might be some combination big holding/pressing buttons or possibly something that would need to be adjusted with the faceplate off (like maybe there's an extra little button or something that's covered by the plate.

    There's a good change that the reason it seems to be turning off and on randomly is because those settings are off and it's getting too easily or not easily enough or not staying on long enough for the amount of motion in the room. There may also be settings for how much it can be dimmed which may be why they don't seem to do anything.

    Without knowing the brand/model I couldn't tell you what the procedure is to adjust it, but if you're able to figure that out there's probably a manual on the manufacturers website. Assuming you're in the US, there's a really good chance it was made by either Leviton or Lutron if you wanted to take a few minutes looking over their website to see if you can find a match.

    I have a non-dimming motion switch in one of my closets at home. It took a little fiddling to get it dialed in to where it would reliably trigger when I opened the door but wouldn't randomly trigger who-knows-what little movements it seemed to think we're happening in my closet (I liked to joke we had ghosts)

  • source
  • hideshow 1 child comment
  • [–] [S] 2 points 17 hours ago* (last edited 17 hours ago)

    The brand name / where to find the user manual was actually what I was looking for initially yes, until someone helped my slush-brain realize I could just tape cardboard over it. I'd still like to give you credit for actually answering the original question though!

  • source
  • parent
  • [–] 7 points 1 day ago*

    Side buttons are a dimmer, big button next to side buttons is a toggle, top for light on, bottom for lights off small rectangle on bottom is the motion sensor, motion sensativity settings are under the switch plate. Lights flickering could be faulty switch or non dimable LED bulbs used with a dimmer. Pushing the bottom of the big button and holding it down for a few seconds should turn off the light and deactivate the motion sensor "auto on"

  • source
  • [–] 4 points 1 day ago (9 children)

    Are those secure torx screws or whatever they’re called? Those aren’t common. They really don’t want you removing that. The driver is kinda hollow with a star or hex shape.

  • source
  • hideshow 9 child comments
  • [–] [S] 4 points 1 day ago* (8 children)

    Yes, they are. I also don't want anyone removing it right now, LOL, although I've seen people manage it with tools made out of broken combs, toothbrushes, etc.

  • source
  • parent
  • hideshow 8 child comments
  • [–] 3 points 22 hours ago (5 children)

    I’ve seen people manage it with tools made out of broken combs, toothbrushes, etc.

    You can buy a tamper-resistant torx screwdriver for those. They're not expensive.

  • source
  • parent
  • hideshow 5 child comments
  • [–] [S] 1 point 17 hours ago* (last edited 17 hours ago) (3 children)

    The people making diy tools to open them can't really get to a hardware store. We do have one on the unit for use with a specific piece of equipment, but there's other important safety reasons that I can't be opening fixtures in that area. Fortunately someone suggested cardboard and tape, which worked beautifully.

  • source
  • parent
  • hideshow 3 child comments
  • [–] 2 points 11 hours ago* (last edited 4 hours ago) (1 child)

    The people making diy tools to open them can’t really get to a hardware store.

    Do they have no shipping address, or live someplace where things can't be shipped?

    I love workarounds to specialized tools, but I find the workarounds are often not worth the trouble when the right tool is cheap and available.

  • source
  • parent
  • hideshow 1 child comment
  • [–] [S] 1 point 37 minutes ago* (last edited 30 minutes ago)

    The funniest part is that I don't even feel like I'm being intentionally obfuscatory, but maybe that's just because I've spent so long in these environments (and it's not like obfuscating here would hold up to my comment history anyway). To me, the presence of torx screws at all implies that the people ARE the safety hazard. They wouldn't even BE a useful thing if the population you're using them with had easy access to the tool.

  • source
  • parent
  • [–] 2 points 1 day ago (1 child)

    I realized I'm probably replying a bit too much here, but I had another idea. These switches work by sensing rapid changes in heat level. Putting nearly anything over the switch/sensor will prevent it - a piece of paper, a towel, etc. If the switch is sensing something in a weird way that could put a stop to it.

  • source
  • parent
  • hideshow 1 child comment
  • I used to work in an office with shitty motion sensing lights. They would constantly turn off if only one or two people were in the room.

    I managed to find the general model online and from there I was able to reprogram the lights to stay on at least 15 minutes.

  • source
  • [–] 1 point 1 day ago

    After reading a few of the replies, plus your own: if your goal is to get the light(s) to turn off temporarily, it will likely be easier to disconnect them if you don't have a security torx bit on hand. What kind of light(s) are you looking at?

  • source
  • [–] 0 points 1 day ago (8 children)

    It's not worth worrying about or fussing over. Replacing a switch is an easy task, all you need is a screwdriver. Then you'll have what you want, it will work, and you can toss this thing. Go buy a switch you like, watch a video or two on how to do it, TURN OFF THE BREAKER, and replace the switch. It will take all of 10 minutes if you go slow.

  • source
  • hideshow 8 child comments
  • [–] [S] 1 point 1 day ago* (last edited 1 day ago) (7 children)

    Don't have access to any of that and opening it at this time would be... unsafe. Work order is already in but they won't be here until tomorrow and that doesn't help the person trying to sleep near it.

  • source
  • parent
  • hideshow 7 child comments
  • [–] 6 points 1 day ago (3 children)

    Have you tried covering it up with something for the time being so it can't detect any movement?

    Otherwise I would check to see if any other switches cut power to that circuit. It would be unusual to not have any way of switching a light off completely.

  • source
  • parent
  • hideshow 3 child comments
  • [–] [S] 4 points 1 day ago (2 children)

    Can't believe I didn't think of that, ty, it appears to be working.

  • source
  • parent
  • hideshow 2 child comments
  • [–] -4 points 1 day ago (2 children)

    unsafe

    I'm in the Us and while I would not call 110 VAC safe it's very unlikely to do any kind of lasting harm. Don't grab the both sides of the circuit with opposite hands, have dry hands, don't wearing metal, etc and you'll be fine. If you're able to get the screws off you'll only need to remove the neutral wire. This wire should not be carrying any voltage.

  • source
  • parent
  • hideshow 2 child comments