Zigbee plug turns off by itself? (lemmy.nz)

submitted 2 years ago by sylverstream@lemmy.nz to c/homeassistant@lemmy.world

12 comments fedilink hide all child comments

I've got a couple of Zigbee plugs, all work well, except one I use for the washing machine. It randomly turns off. When I check the history in HA, it just says that it turns off, no source. My guess is that it trips, ie temporarily exceeds 10A. The plugs are rated 10A from Aliexpress.

you are viewing a single comment's thread
view the rest of the comments

[-] solidgrue@lemmy.world 2 points 2 years ago

By the math you are correct. I blew out some switches that were 10A, 120VAC peak, but somehow only rated for 600W continuous, resistive. Amazon doesn't sell them anymore, but it would be printed on the housing if that's the case. That's why I was saying to look.

My switches might have been the "no neutral" variety, though those are a special kind of janky.

this post was submitted on 16 Mar 2024

24 points (100.0% liked)

homeassistant

19557 readers

37 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world