Zigbee plug turns off by itself? (lemmy.nz)

submitted 2 years ago by sylverstream@lemmy.nz to c/homeassistant@lemmy.world

12 comments fedilink hide all child comments

I've got a couple of Zigbee plugs, all work well, except one I use for the washing machine. It randomly turns off. When I check the history in HA, it just says that it turns off, no source. My guess is that it trips, ie temporarily exceeds 10A. The plugs are rated 10A from Aliexpress.

you are viewing a single comment's thread
view the rest of the comments

[-] ThePantser@lemmy.world 3 points 2 years ago

If it is a power tracking one you should be able to see if it's being overloaded. Unplug the washer and see if it still turns off if it does then something is turning it off. I really trust the sonoff ones that I flash with tasmota, they are WiFi but they are rock solid and offline. They make zigbee ones too. The sonoff one on my all in one washer never has had a problem.

this post was submitted on 16 Mar 2024

24 points (100.0% liked)

homeassistant

19564 readers

45 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world