I'm building a house. Floor plan attached if it helps.
I've spent the last 3-4 days knee deep reading archived posts, watching youtube, and digesting as much information as possible. Over that time I've convinced myself I need a different set up roughly 12 times. Need some direction.
Budget: Not really a consideration. But less is obviously cool.
Background: I'm an enterprise software salesman buy trade, but not a network engineer. And even though I'm willing to roll my sleeves up and do a bit of learning, I really don't want a massive -- and especially not a continuous -- project on my hands. I never plan to move again. The house won't get great cell reception and I'll be reliant on wifi calling in many cases.
Anticipated Gear List:
- 8-10 POE security cameras/NVR (hardwired)- whole home Sonos kit (16 speakers, 5 amps) (hardwired)- Multiple TVs (hardwired)- a host of IoT devices - hubs, doorbell, thermostat, other automation stuff (hub(s) hardwired)- 2 offices (computers and 1 printer hardwired)- Mesh/access points (hardwired) -- this is the million dollar question
My (probably obvious) plan:
- pull all ethernet drops to a centralized location- ISP coax --> modem --> router --> POE switch- terminate all the ethernet cables to logical ports (save the POE ports for the cameras and anything else that needs power)
My Conflict(s):
I'm confident I could get it all installed properly. I'm not confident whatsoever that I could figure out how to deploy it once it was all powered up.
And, as a result, I don't know what the hell to buy.
It seems Unifi is the default suggestion for most, and while I'm not sure is ISN'T what I'll end up with, I do think it's overkill for my specific needs. In our current home I have been running a google mesh and its.....fine. It works, it's not perfect, but it's simple and essentially never has issues. Maybe I'm lucky or maybe I have very low expectations. I'm convinced I'll have trouble troubleshooting or fixing things when they inevitably break with unifi - but I could just be psyching myself out.
I'd love to be able to set everything up once -- and if I have to mess with it once or twice a year so be it -- similar to my current set up.
Could I get away with this?
ISP coax --> ISP's modem --> (need a router recommendation) --> random POE switch with enough ports to support all my gear? I might also add a UPS and surge protector.
Practically speaking, how would I initially configure/set up everything if I piece meal it together with various OEM gear? Let's say ISP modem (should I get my own?), TPlink router, Netgear POE switch? Sorry if that's a dumb question.
Similarly, how much more difficult/easy would a similar Unifi solution be?
Also, sorry for the rant. Struggling with info overload. I dumped so much time into this and have found myself with more questions than I started with.
Processing img 8gh9iutqie3c1...
Yes. Specific router recommendations will depend largely on your ISP speed. Your existing Google mesh router is likely sufficient. (not sure which unit you have exactly)
TPLink router. These, or really any consumer router would likely be fine. Again, it depends on how fast your ISP service is which model you'd need specifically. Also again, your existing Google mesh equipment is likely sufficient. Consumer level stuff will basically configure itself. It sounds like you've already configured your mesh system. It won't be much different here.
Netgear POE switch. Totally fine. This shouldn't need any configuration at all. You can get a managed switch and configure all sorts of things, but there's likely little benefit to you to doing so and you'd need to get a router that supports VLANs and such to go with that.
I can't comment on this. I've never messed with Unifi gear.
Overall, don't overthink it. Modem plugs into router WAN port. Switch plugs into router LAN port. Everything else plugs into the other switch ports. Make sure you plug each of your mesh APs into the switch as well and configure them as hardwired units instead of using wireless backhaul.
You can do this.
Edit: formatting
My guy. Thanks.
I’m definitely overthinking it - you’re right there. But your answers alone served as the sanity check I was looking for.
I know you said you’ve never used any unifi equipment, but as far as I can tell, you can either configure everything through a rack mounted controller (for those doing all the things I said I wouldn’t) OR simply download an app to your phone or PC and do it there. If that’s the case, and I can get some anecdotes from people who have done that successfully, I’d feel more confident about Unifi in general.
Again, appreciate the response!