Australia

A tip truck driver who hit and killed a woman cycling to work did not see the Brisbane nurse due to a large blind spot, a Coronial investigation has revealed.

The death of avid cyclist, Carolyn Lister, in 2020 has been labelled “tragic and unnecessary” by cycling advocates.

Coroner Anne Thacker’s report into Ms Lister’s death was finalised this week and detailed the registered nurse’s final moments.

On June 30 Ms Lister left for work at 7:17am on her new bicycle after she ate breakfast and read the paper.

Just 20 minutes later she would be dead, after CCTV captured her at a red light appearing to indicate to a tip truck driver she would be riding straight in front of him in the right hand lane of O’Connell Tce, Bowen Hills.

The lights turned green and Ms Lister cycled straight ahead, the truck driver moved forward and began to turn right onto Bowen Bridge Rd, when the vehicle struck the back of her bike.

She was killed instantly after being run over by the passenger side wheels.

The 50-year-old was a keen cyclist – with 10 years experience – and would normally ride along a bikeway to the hospital, crossing at a traffic light and using a footpath to reach the hospital’s cycle centre parking.

However, the week before her death, construction to remove combustible blocked the footpath north of the cycle centre forcing her to take the alternate route.

The report found the truck driver, contracted to construction materials company Boral, was speaking on the phone, legally using hands-free Bluetooth and did not see Ms Lister.

The vehicle was not equipped with, and did not legally require, blind spot mirrors, cameras or sensors, despite recommendations made in a coronial inquest into the death of Danish student Rebekka Meyer, who was hit by a truck while riding on Annerley Road in South Brisbane in 2014.

Ms Meyer’s death inquest called for “conventional shaped heavy vehicles [to be] prohibited unless they are fitted with appropriate technologies to warn the driver of any obstacles or other road users within the forward blind spot of the truck”.

Ms Thacker’s inquest said this recommendation was not implemented as the cost of retrofitting and disparity in state legislation with vehicles frequently crossing state borders.

Bicycle Queensland CEO Lisa Davies-Jones said they had been “very disturbed” to read the coronial report.

“She died because there is no appropriate cycling corridor around the Royal Brisbane Hospital, a major workplace. The truck which hit her did not have safety features which have since been made mandatory for new trucks in Australia,” she said.

Advocates Space 4 Cycling wrote that if the truck had additional safety features Ms Lister would have likely made it work and back home safely.

“We had hoped a full Coronial Inquest might provide a more comprehensive analysis of the system that failed Carolyn and the truck driver that morning,” the advocacy group wrote.

The cycling advocacy group said the report left many unanswered questions including why the route the truck driver took was approved, what consideration was given to how cyclists might access the RBWH Cycle Centre safely while the footpath was closed and if the road design is suitable.

“We hoped the community could be reassured that adoption of better practices would make cycling safer for them and their loved ones,” they wrote.

“Instead, the only real response to the tragedy so far has been some “educational” and “awareness” campaigns directed at cyclists to help us understand that trucks with dangerous blind-spots are our problem to deal with.”

A spokesman for Boral welcomed the coroner‘s report and noted that they have acted to ensure that their fleet has appropriate blind-spot mirrors or cameras installed.

“And to restrict the route that our fleet and contractors travel through in Bowen Hills so as to avoid the intersection in question,” he said.

“The contractor truck involved in the accident was compliant with Boral’s fleet standards at the time. We have now defined as part of our minimum national fleet specifications that blind spot mirrors are a requirement across all company and contractor fleet.”